V Ports = madness ports

[FiReBReTHa]

First I could not get any functionality from red / black to Blue+ and White-

So, dillies and diddles I swapped it. I now have functionality even tho I shouldn't ..

So, the v2 sometimes dims off of the v1 port for some reason. I am not getting separate functionalities.


Thoughts?

[RussM]

What pins are you using? V1 & V3 are on 5 & 6; V2 & V4 are on 1 & 2.

[md ca]

I am having the same situation. I also reversed the red and black.

V1 and V4 work. V2 and V3 do not work. I have 2 drivers -- I plugged them both into the first variable port (using a Neptune cable) and V1 worked great, but V2 failed. I took the same cable, attached to the same drivers and plugged it into the second port, and V3 did not work, while V4 did. I even tried reversing the red / black for the non working channels -- no improvement.

I am using v1 and v4, but I would really like to use all of them. Any help would be appreciated.

Thanks, MD

[FiReBReTHa]

What pins are you using? V1 & V3 are on 5 & 6; V2 & V4 are on 1 & 2.

Apex OEM cables.

[RussM]

Contact Neptune support.

[Jaycen B.]

Bad cable?

[Ninja1]

Having issues with v ports as well- I had to contact Neptunes Support