PDA

View Full Version : Tunze 9002


Endy0430
08/08/2011, 07:05 PM
I have the older style 9002 with the bracket instead of the magnet. I wanted to know if I can replace the bracket with the magnet can you please advice on part number if it is possible.
Also I need a new pump for it can you also give a part number for the pump as well

Thanks
Endy

rvitko
08/10/2011, 10:07 AM
Yes, technically to be identical you need to snap off the rail mounting plates, which is generally just as easy as a quick twist with a pair of pliers. You then glue on the mag holder after thoroughly cleaning the skimmer body and wiping the magnet holder with alcohol to remove any oils. The ideal glue is Tangit, airplane model cement is an alternative. Tangit is our part 0104.710, the magnet holder is 6025.500. Alternatively you can attach the magnet holder with screws (holes are there and line up) to the existing plates with the same screws as the rail.

Endy0430
08/10/2011, 11:41 AM
Sounds good what about the pump can u give me a part number.

Thanks for the response

rvitko
08/10/2011, 12:26 PM
Pump would be the older 0800.040.