Ordered today have 1 more?

[lantonini]

Hey I placed an order today but have 1 more question. Will the 10k pot. Work with the 48 led, 12noon. I am going to order 5 total. Thanks
Luis

[ReefLEDLights]

It depends how you are going to use it.

If its going to be used with the inventronics drivers you would either need one for each driver or you would need to connect all the drivers purple leads together and all the grounds together to connect to the potentiometer and then use the 10v + from one of the drivers to feed power to the potentiometer.

http://www.youtube.com/watch?v=fknuM9zxvKM&feature=player_embedded


If you are using it with the Meanwell drivers you will need a power source (IE enercell power supply from radioshack) to feed the potentiometer the power that you would then regulate (turn the knob) to control the dimming.

[lantonini]

Ok so I will pick up the 10v power supply.
Will I need 1per driver or can I take the + and feed the pots?
Also how many drivers can 1 pot dim? I would like to have the 3 rb drivers dim together, high noon and whites to dim separate. So I was thinking 3 pots. And how ever many 10v transformers.

[ReefLEDLights]

Ok so I will pick up the 10v power supply.
Will I need 1per driver or can I take the + and feed the pots?
Also how many drivers can 1 pot dim? I would like to have the 3 rb drivers dim together, high noon and whites to dim separate. So I was thinking 3 pots. And how ever many 10v transformers.


3 drivers should be no problem on one POT.

Each 40 watt Inventronics driver has its own 10vdc power cable.

Bill

[lantonini]

issue is I ordered the meanwell units. Do you mind changing them to the inventronics and refund the difference.

[ReefLEDLights]

issue is I ordered the meanwell units. Do you mind changing them to the inventronics and refund the difference.

No Problem will call to confirm

Bill

[lantonini]

sweet thanks I placed the added order yesterday for noon kit, hanging kit, 3 pots and led seal. wife is going to kill me... oooowell