Help, all of my outlets have disappeared

[Texsun]

I have an Apex running with 2x EB8s. I installed a WXM module last night and managed to get everything connected to the 2x MP10wes. I tried to change one of my profiles using the display unit and the display went blank and the Apex rebooted. Since the reboot, all of the equipment connected to the EB8s shut down and none of the outlets are listed in the display. The WXM is running fine. I didn't save my programming but I'm hoping there's a way to recapture the EB8s, outlets and programming the way they were. The green lights are lit on both EB8s. Please help!

[aquamanic]

You can try to hAve the system rescan the bus and hopefully recognize the modules. You can do that from the display using menu system...initialize memory....init aqua bus dev. Probably won't restore your program though.

[Texsun]

Thanks, just got home so I'll try that, but how can the EB8s just disappear like that? I assume if the rescan doesn't work I'll have to add them manually?

[xcorallusx]

This same problem happened to me after hooking up wxm module, please help!