PDA

View Full Version : Video of my setup


bluebastion
10/01/2011, 11:39 AM
:wave:


Will be posting part II and III of my setup:

http://www.youtube.com/watch?v=TLrHdmljh6s

I will also be posting a video of the system in action.

bluebastion
10/02/2011, 12:09 PM
Part II (Full details of my setup and run-down of the system):
http://www.youtube.com/watch?v=FurJabvn5b0&feature=related

Part III (First water change and operation of Renew):
http://www.youtube.com/watch?v=Fxm8ymbWvzU&feature=mh_lolz&list=HL1317576716

reefkeeps
10/02/2011, 04:12 PM
Very nice, looks very similar to how I have it setup.

I couldn't tell from the video, how did you hook the indoor pump up to the controller?

bluebastion
10/02/2011, 06:56 PM
Very nice, looks very similar to how I have it setup.

I couldn't tell from the video, how did you hook the indoor pump up to the controller?

I'm assuming "indoor pump" is the sump pump (waste water).... if so do you mean where did I place the pump? It's in the skimmer chamber behind the skimmer in the video. Or do you mean where is the float sensor that kills the pump before it runs dry? That is in the refugium that stays the same level as the protein skimmer.

Please clarify your question if I'm not interpreting it correctly. :)

reefkeeps
10/02/2011, 08:21 PM
Sorry, I meant how did you run the power from inside the house to the garage?

bluebastion
10/02/2011, 09:01 PM
Sorry, I meant how did you run the power from inside the house to the garage?

Ahh... I see what you mean. I drilled a 2" hole in the wall between the garage and living room. I ran the plug through first so that I could run the hose and the sensor wires through afterward with no trouble. Fortunately the power cord was long enough. :)

I have a build thread on nano-reef if you're interested in checking out detailed pictures.