PDA

View Full Version : Programming powerhead for wavemaking


jisham
10/28/2011, 02:05 PM
Quick question. I have a Koralia Evolution powerhead I'm using in additional to a Vortech MP10. For the Koralia, I want it to oscillate only while my main tank lights are on (noon to 9 pm) then stay off from 9 pm to Noon. Will the following code work?

Fallback off
OSC 5:00/5:00/15:00 Then ON
If Time 21:00 to 12:00 Then OFF
If FeedA 5 Then OFF

swearint
10/28/2011, 02:20 PM
Yes.

Todd

jisham
10/28/2011, 02:22 PM
Thanks!

RussM
10/28/2011, 03:11 PM
Or, as an alternative:

Fallback off
OSC 5:00/5:00/15:00 Then ON
If Outlet MainLight = OFF Then OFF
If FeedA 5 Then OFF

This syncs the operation of the Evo to the state of the lights, and if you change the times for the lights, you won't need to edit the times in the Evo outlet to match.

jisham
10/28/2011, 04:41 PM
Or, as an alternative:

Fallback off
OSC 5:00/5:00/15:00 Then ON
If Outlet MainLight = OFF Then OFF
If FeedA 5 Then OFF

This syncs the operation of the Evo to the state of the lights, and if you change the times for the lights, you won't need to edit the times in the Evo outlet to match.

Even better...thank you.