Help with AI Sol Blu configuration/layout

[finrod2]

I have 6 Sol Blu Modules for my 60" x 36" x 28"T tank. Tank has center brace. Can I mount these on a single 60" rail like shown on website? It does say that max tank "depth" is 24" though. I will probable mount about 6-8" above water. Any help or experience would be helpful

[Bosha]

With the 36" deep you might want to consider 70 deg. optics for more spread and with a depth of 28" hang the lights as close as possible.

[Sidwayz]

8 to 10 above water. Single rail will work. Pretty strong aluminum rail. Will be a clean install. May have to set the w bl rb a little higher to compensate for depth. Your corals will let you know how much they can take. You do have to take into consideration the input wires between units.

[blackx-runner]

If it weren't for the center brace 2 rows of 3 lights I think would be ideal.
I'm in the same same boat with my tank as well. I don't have the 6 units yet, but its what I was considering. I'm thinking about different options right now. Don't really know what I will do.

[finrod2]

I've decided to two rows of three but in a staggered configuration to get max coverage. I'll let you know how it turns out.