Uv light soldering issue

[jbliss]

For some odd reason my 60/40 solser never seem to work on the uv light contact, any suggestions. Thanks for all the help with all my orders, lights, etc.... You guys are the best !!!!!!!!!!!!:wavehand::wavehand:BIG THANK YOU TO MIKE!!!!!!!!!!!!

[ReefLEDLights]

If you have a solder sucker try heating up the pads and then using the solder sucker to pull off the existing pretinned solder/flux and then try to retin the star's pads with the solder.

We actually recommend 63/37 solder to make the job easier.
http://reefledlights.com/shop/6337-rosin-core-solder/

Hope this helps

-Rick