heatsink size

[drtrash]

Looking for a heatsink for 12 LED, I have a 6x11 available. Is there a splash grd for 4" wide heatsink?

[ReefLEDLights]

Looking for a heatsink for 12 LED, I have a 6x11 available. Is there a splash grd for 4" wide heatsink?


At this time we only stock Splash Guards for our custom 12"x8.46", 18"x8.46" and 24"x8.46" Drilled and Tapped Heatsinks.

Bill

[drtrash]

What lengths do you carry in 4" wide drilled & tapped? Need at least 10" long (12 led)

[ReefLEDLights]

What lengths do you carry in 4" wide drilled & tapped? Need at least 10" long (12 led)

My apologies.

We found the 4" wide limited on thermal management for most reef applications and do not offer a drilled and tapped version.

That said www.heatsinkusa.com has them and a 3/32 drill with our #4 self tapping screws will work with well with the BJB solderless connectors.

Bill

[drtrash]

So do you recomend a 6" wide heatsink for 14 led?. Can this be done without a fan?

[ReefLEDLights]

So do you recomend a 6" wide heatsink for 14 led?. Can this be done without a fan?


The Fan is highly recommended as it dramatically cools the heatsink and the cooler your LEDs are the longer they will last.

Bill