Apple software for XM/CRP units...

[PacificSun_eu]

We want to inform all previous customers, that on end of this week there should be released beta version for this lamp models..
It will be compatible with:
Black Python :
- CRP 110W, 160W, 200W AE
- XM 140W
Pandora XM - 1250mm, 1650mm(3x150W, 4x150W)
Metis CRP/XM
-Deimos/Phobos 110W,160W,200W

More informations soon.

Regards

Przemyslaw Cybulski
R&D Pacific Sun Team

[speedo]

Hi Przemyslaw,
now it is end of the week, do you have a download link for us? :thumbsup:
Thx
Dirk

[speedo]

Hi Przemyslaw,
any news or update regarding your 3 channel XM/ Apple software?
Thx
Dirk

[PacificSun_eu]

Yeah - we are working 18h/24h on it. I promise to send more informations soon - and I hope that on next week it will be avalaible to download..
This delay is source by situation, that in the same time there are work on new firmware for all lamps - 3ch an 8ch - and this jobs have to be did parallel - if Mac team go ahead - they have to wait for hardware programming team - and in other way also..
Thank you for understanding!

Regards

Przemek Cybulski
Pacific Sun RD Team

[speedo]

COOL :bounce3:

Please tell us something about new firmware, what's new?

Thx
Dirk

[zwo10er]

Hello,

how is the status? is there perhaps already a beta version?

Best regards, Olli from Germany

[Laribum]

so whats about the new soft- and firware?
if there is someone new for windows it will be also ok at first.

my metis xm is waiting for new firmware and software....

some beta will also be ok.....

[Pacific Sun RD]

I think that on end of next week newest firmware for 3ch lamps will be ready.
It will include also some ideas from 8ch firmware..
After that - soft for Win/Mac will be applied to this changes also..

Rgds

Luke

[Laribum]

Hi Luke,

so whats about the new Firmware for 3 Ch Lamps ????

Jörg

[Pacific Sun RD]

Hello Jorg,
After final release for 8ch lamps - we will rewrite some functions to 3ch firmware - its much easier to write/test firmware on more advanced platform - and after debug - rewrite(checked and working) source code to 3ch computer.

Best regards

Przemek

[galkito]

Hi there!

Is it going to work on Iphone as well??

[Pacific Sun RD]

Not for 3ch lamps - only newest Tritons/Hyperions will have that possibility.
Unfortunatly - Apple iOS dont support SPP profile for BT devices..

Regards

Przemek

[galkito]

hmmm, too bad
Maybe you could make a wi-fi upgrade for the modules then:-)

[zwo10er]

Hi,

have you any information for us?

[Pacific Sun RD]

Hello,
More information in that thread:
http://www.reefcentral.com/forums/showthread.php?t=2152094&page=2
It will happen in next coming weeks.

Rgds

Luke

[Pacific Sun RD]

Hello,
I want to inform - that apple software for 3ch lamps(working with old/previous firmwares) are ready for use.
This software was reeleased BEFORE newest firmware for 3ch development - because there is many customers with our 3ch lamps(many diffrent models) - which are using old firmware - or they will not want to change firmware for newest(or they cant - because they have old type computers).
This software is perfect for lamp configuration in Basic mode - without PAR table, which was little diffrent for many firmware releases..
So - cutting of that table give us possibility to release "unified" version of that software..

http://www.pacific-sun.eu/download/3ch_1.jpg

http://www.pacific-sun.eu/download/3ch_2.jpg

http://www.pacific-sun.eu/download/3ch_3.jpg

http://www.pacific-sun.eu/download/3ch_4.jpg

http://www.pacific-sun.eu/download/3ch_5.jpg

And link to software:

http://www.pacific-sun.eu/download/PacSun_3ch.app.zip

Rgds

Luke

[Pacific Sun RD]

Please let us know if something is not working.

Rgds

Luke

[Jantje]

Hi,

Tested it and it seems to work OK, but there are a few things that are not working as they should. In windows software there was a option to read the current settings from the lamp in Apple software there is no option for that.

If i adjust the moonlight slider the slider moves but the percentage is updated only after i release the slider and not during the slide ?

For me this is of no use because not being able to change the PAR tables is not a option.

Greetings Jantje :D

[Pacific Sun RD]

Hi,
Apple version is little diffrent - and as we writed on the start - on this Basic app(Pacific Sun 3ch Mac OS X Basic) - there will not be PAR table tab.
About sliders - this look and works little diffrent than under PC - but its not depend from us - it is a objective C language procedures - and slider under Mac OS "send"(update) info to app after you will release him(not when you ar emoving it)..
We can add controll buttons to change this value every 1% (left - right) - but we are not sure that it will resolve this "problem"..

Rgds

Luke

[zwo10er]

Hello,

thanks for the software to operate the lamp with a Macbook splendidly, finally. Is there also soon the option to update the software of the lamp about apple? It would be great.

Thanks and greeting