Where to install pressure gauge on RoDi?

[dom418]

I just bought a typhoon iii without the pressure gauge. I bought a add on gauge but am not sure which line to install it on. Any help would be appreciated.

[lecher]

Right before the ro membrane. When the pressure starts to drop you know the prefilters are starting to get clogged.

[Buckeye Hydro]

Right - after the last prefilter, after the ASOV (if you have one), but before the membrane "in" port.

[dom418]

So between the asov and the membrane? The membrane "in" is the end with the threads correct ? It's just a little confusing as the asov has 4 tubes coming out of it. It's just a little confusing as the asov have 4 tubes coming out of it

[Buckeye Hydro]

So between the asov and the membrane?

Right


The membrane "in" is the end with the threads correct ?

Right

[dom418]

Thanks!

[Buckeye Hydro]

This may help:

http://i224.photobucket.com/albums/dd293/BuckeyeFS/RODIwithASOV.jpg
Russ

[dom418]

So on the bottom tube of the asov that connects to the membrane "in"

[Buckeye Hydro]

Right - between the port marked "out" on the body of the ASOV and the membrane housing "in" port.

[dom418]

Great thanks!