View Full Version : Running Multiple Reactors on 1 Pump?
Is it possible to run a few (2-3) reactors in line with one pump? I realize it will be impossible to adjust the flow for a single reactor.
Or could I just use a T or Y fitting to run several reactors independently, but still with just one pump?
maddiericola
08/14/2012, 08:15 AM
you can try y/t coupling with 1 ball valve to 2 outputs, by controller one output, you indadvertedly control the other output.
sirreal63
08/14/2012, 08:24 AM
Tee off of the pump with a valve before each reactor. I am doing this with a couple of Phosban 150 reactors, you get independent control of the flow in each reactor.
Tee off of the pump with a valve before each reactor. I am doing this with a couple of Phosban 150 reactors, you get independent control of the flow in each reactor.
+1 build yourself a manifold. You will need a larger pump since you will have some head loss and you'll be running the reactors independently.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.