PDA

View Full Version : Quick connect fitting


Hornet
09/05/2012, 04:39 PM
I'm about to order replacement filters for my Chloramine 75. I also need to replace the quick connect fitting on the housing where the tubing for filtered water comes out.

What size is it? Or what is the nomenclature on your website? I'm thinking it is maybe the BFS-62 or BFS-383.

Buckeye Hydro
09/05/2012, 05:59 PM
Hi Hornet - the fitting on the "out" port of the DI housing is one of these:
BFS-61 Elbow 1/4 inch npt x 1/4 inch quick connect - $3.00

Russ

Hornet
09/05/2012, 07:11 PM
Hi Hornet - the fitting on the "out" port of the DI housing is one of these:
BFS-61 Elbow 1/4 inch npt x 1/4 inch quick connect - $3.00

Russ

BFS-61 is an elbow . The fitting I need is a Straight/Male connector. It screws into the housing for the last stage filter.

Buckeye Hydro
09/05/2012, 07:17 PM
OK. A straight fitting for this location would be:
BFS-62 Straight 1/4 inch npt x 1/4 inch quick connect - $3.00

Hornet
09/05/2012, 07:52 PM
Thanks, I just placed my order.

I damaged the original connector after years of snatching the tubing out to switch to the other port when I filter drinking water.

Buckeye Hydro
09/05/2012, 07:54 PM
You could always get some additional tubing for that...

Hornet
09/05/2012, 08:47 PM
Yeah, I'm going to pick some up from the hardware store when I replace this one.