PDA

View Full Version : Bean animal over flow question


rossco838
09/30/2012, 11:28 PM
I have just built my 220 gallon into the wall and one of my bean animal stand pipes will not fit (the emergency drain), my question is would it work the same if I just put a 90 from the bulkhead instead of the tee. The 90 will fit without issue but the tee will not

Sent from my SGH-I747M using Tapatalk 2

jerpa
10/01/2012, 12:53 AM
It will still function properly with the emergency drain.

a.browning
10/01/2012, 08:52 AM
You only need a tee on the open channel so you can drill a hole in the cap, so that will work fine!

leveldrummer
10/01/2012, 12:56 PM
do you even really need the 3rd line? all tanks work fine with just 2 over flows with no emergency setup. have often is there failure where both lines clog? is this something to worry about more with the bean design?

rossco838
10/01/2012, 05:04 PM
For me it is really all about I'd rather have it and not need it than need it and not have it.

Sent from my SGH-I747M using Tapatalk 2

a.browning
10/01/2012, 05:21 PM
Definately not something you have to worry more about on a bean design.

No reason not to have the extra safety, and it makes the system basically fail proof.