Neptune

[Kroghs]

Setting up my Neptune Apex and would like to set the temperature units from Celsius to Fahrenheit on my network settings on my computer. It is set to Fahrenheit on the Aqua Conroller Display but in Celsius when I go on my computer to check.


Also the probe that came with the Apex Controller & Display is for temperature only or will it read PH also?

Thank you

[woodnaquanut]

pH is a separate probe. You should have gotten both if you got the standard Apex (not Jr or lite) package.

Temp. Try clearing your browser cache.

[RussM]

The temp scale setting is global. I don't see how you can have different displayed values on the display vs the web page.... mine always match between the two. You can change the temp scale between C & F on the Probe setup web page.

You'd need a pH probe to measure pH.

[grcforce327]

I don't see how you can have different displayed values on the display vs the web page.... mine always match between the two.

Actually, being wireless, it takes alittle bit for my web page to catch up with the display.

[HeneryH]

Argh, OK enough.

Subject Line = topic of discussion

Not your name, not company name, not whatever else you were thinking of putting in there.

Love,
The Grinch

[L8ndeb]

Argh, OK enough.


Love,
The Grinch

:lolspin:

[JustinFromAL]

It sounds like you need to clear your browser cache.

[RussM]

Actually, being wireless, it takes alittle bit for my web page to catch up with the display.

That is not what the OP says he/she is seeing.

[aquamanic]

Joe needs some more eggnog!


Alan