PDA

View Full Version : I need DIY led help please


Exotic Reef.
12/27/2012, 12:30 PM
Hey i just purchased 24 leds 12royal blue and 12 cool white . I have 1 diy set on my tank that iv had for a few months on my tank and they work with no problem let me put as much ifo as i can below


Drivers - (2) Mean Well ELN-60-48D dimmable driver
One for 12 royal blue and another for 12 cool white

Dimmers are from rapid led

Wire 18 gage

I triple checked my wireing from + to -

I lowerd the screw inside the driver its in the middle but more to the left

NO my leds are not blown out because when i use the battery tester the still light up

I first did the blues and they did not turn on so i attempted the whites the same way i did the blues the whites turned on with no problem i can dim them and all but my blues wont turn on

Please help if any info is needed to help me post please

Photobug
12/27/2012, 12:46 PM
Do you have a multimeter?

Test the continuity of the individual strings and power output from the power supplies.