PDA

View Full Version : tunze question


Kieth71
01/12/2013, 06:19 PM
I am thinking about getting two 6095 nano streams with a 7096 controller and wanted some input from those that are useing this pump as to how well they work-Kieth

autodave
01/12/2013, 09:35 PM
Great pump, small body that produces a nice wide flow.

r-balljunkie
01/13/2013, 01:00 AM
what are you running now for pumps?

i've ran this combo for about a year, and its a very flexible arrangement. couldnt be happier. you cannot hear them running, and you can ramp them up, stop them / start them in 1 second intervals, etc. repair parts are cheap and service is top notch, i expect to use them for at least 5 years, trouble free.

Kieth71
01/13/2013, 09:37 AM
I was running mp 40 pumps but sold to buy some tunzes.I just wanted some input on these pumps as i was not sure which i would go with.Right now i have a few korallias in the tank to get me through till i get the new pumps.My tank is 60*18*20 so want to make sure they will be enough-Kieth

yeldarbj
01/13/2013, 09:04 PM
I love the 6095's. I replaced 2 much larger 6105's with the 6095's. Very, very quiet and really nice flow.

krzyphsygy
01/13/2013, 11:42 PM
Crazy awesome pump the 6095 is. I just got one about a week ago. It is hooked up to a 7092 controller with a 6105 as well.

I also have the same size tank you do. I wish I would have just gotten two 6095's instead of the one 6105. The 6105 is much higher flow, but also the size of a softball and I perfer the smaller footprint. The 6095 is on the back glass at the end pointed to go long ways down the back of the tank. The 6105 is opposite and they are on inverse mode. There is also an MP40 on one end as well. Super high flow in my tank. Took a while to get the flow dialed in. Had sand and corals blowing everywhere. Had to reduce the jumper in the 6095 to 20V. But I think its good now and I might be able to go back to 24V
.
Two 6095's in that tank at 24V would be nice....depending on corals you keep. SPS, positioning will be key. LPS, positioning even more important because they wont open.
My 6095 rattles alittle a lower flow though :( at high flow no rattle.