PDA

View Full Version : Coralvue RO/DI 100gpd System


AquaCave
01/17/2013, 04:45 PM
http://www.aquacave.com/Assets/NewProductImages/CVRODI1.jpg
Coralvue RO/DI 100gpd System.


CoralVue has assembled a high quality water purifying system that turns ordinary tap water into pure aquarium water - efficiently. With this filtration unit you can be assured that your aquatic animals are enjoying the highest quality water possible.
System Features

Easy to use system controller
Fully-Automated water management
Accurate Digital TDS readings of outgoing product water
Automatic membrane flush system prevents TDS creep Cyclic Membrane Flush (Full Membrane Flush upon shutdown to help prevent membrane scaling)
Back-pressure electronic shut-off for reservoir use
High and low pressure safety kill switches (For pump protection and full system automation)
Audible Alarm
Filter change notifications
Room temperature read out
Tested to obtain ~1:3 Product/Waste water ratio (source water temperature dependent)
Over-sized liquid filled pressure gauge
High efficiency booster pump
Clear filter canisters with silicone o-ring seals
Rugged metal frame for convenient free-standing placement or for space saving wall mounting
Coralvue RO/DI 100gpd System Technical Data

Footprint 14.75" x 9"
Height 17.5"
1 100 GPD membrane
1 polypropylene sediment cartridge
5 carbon block cartridge
1 refillable DI cartridge with high capacity color changing resin
Quiet booster pump (located lost pre-filtration for extended pump life)
Includes canister & membrane wrench, detailed instructions, installation connection fittings, RO tubing and accessories.
All standard 10” canisters, cartridges and "push-connect fittings


More... (http://aquacave.blogspot.com/2013/01/coralvue-rodi-100gpd-system.html)