PDA

View Full Version : HDPE Media for Ozone Reactor


Pro X
01/31/2013, 09:29 AM
Looking for HDPE Media for Ozone Reactor and confirmation that Mutiny 1 Ozone upgrade kit, HDPE ribbon, Check Valve and Dwyer Meter are ALL items necessary to convert 3 1/2" X 18" Avast media reactor over to ozone.

Avast Marine
02/01/2013, 08:07 PM
And you also need to switch out the nylon barbed fittings for pvc ones on the top.

Pro X
02/01/2013, 09:06 PM
I've been emailing back and forth for 3 weeks and still dont have a part # or link to order HDPE ribbon media or a breakdown of your mutiny1 upgrade kit.(does it contain nylon barbed fittings, meter backplate and base?)

I believe I need a Mutiny 1 Ozone upgrade kit, HDPE Ribbon Media, 1/4" Kynar check valve, 8' of 1/4" Silicone tubing, 1' of 1/2" tube and Dwyer meter.

I'm trying to convert a 3 1/2" X 18" Avast Media Reactor over to a Mutiny 1 Ozone Reactor along with 1 of your 3 1/2" X 12" Media Reactors to use as a Carbon Post Filter.

Please email info or post it up I'd like to get this ozone setup going.

Avast Marine
02/01/2013, 10:09 PM
I updated the description here: http://www.avastmarine.com/ssc/do/product/ozone-parts/Mutiny-Upgrade-Kit

Here is the media: http://www.avastmarine.com/ssc/do/product/ozone-parts/HDPE-Ribbon-Media

You can use the bill of materials parts list here as a checklist: http://www.avastmarine.com/ssc/images/store/mutiny_parts_lg.png

All of the parts are on this page: http://www.avastmarine.com/ssc/do/category/ozone-parts