PDA

View Full Version : 37 gallon column conversion to AIO with foam/rock background build thread.


Cubeman
03/28/2013, 03:04 PM
For this build I’m using a 4 year old 37 gallon ‘column’ aquarium measuring 20wx18dx24h. This will be an sps only tank when it is completed with a snail only CUC, various shrimp and a few fish. For me the enjoyment is in watching the reef come together; I could happily run without fish but adding them keeps the rest of the family interested.

This is not a ‘quick’ one week and it’s done build; I won’t be rushing anything. I’ll be trying a few things along the way that I’ve always wanted to do but never have. I thoroughly enjoy the ‘plan and build’ portion of each aquarium I start and the unique challenges each one brings, so I hope you enjoy tagging along as I document this one.

My plan is not fully hatched but here are a few of the steps I am committing to:
1) Clean up the front corner caulking. It has suffered from some overzealous algae blade scraping over the past few years and just plain looks ratty.
2) Converting it into an all in one tank.
3) Build a foam/rock back wall to hide the newly created bulkhead in step two.
4) Find and convert a unique cabinet into a functional aquarium stand.
The equipment list will be developed and detailed along the way.

As I type I am about 3 weeks in to this adventure and have been taking pics along the way. Stay tuned for some updates over the next couple of days.

Cubeman
03/28/2013, 03:14 PM
So here is what the tank looked like to start with. Not a huge fan of the blue background (I prefer black) but there will be so little left visible once I'm done that I decided to leave it for now. Can always change my mind later.
http://i1172.photobucket.com/albums/r567/Cubeman007/tank.jpg

Here's a rather blurry shot of the silicone in the front corners. Nothing wrong with its functionality but it is less than desirable to look at. Here's some detail for the less experienced out there on how I went about cleaning that up.
http://i1172.photobucket.com/albums/r567/Cubeman007/oldsilicone.jpg

The first requirement is a sharp blade or two.
http://i1172.photobucket.com/albums/r567/Cubeman007/razorsilicone.jpg

And a top down shot of the old silicone that has been removed. Note it was just the inner sealant that I removed not the structural adhesive between the panes.
http://i1172.photobucket.com/albums/r567/Cubeman007/siliconeremoved.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/pre-acetone.jpg

Next the glass was cleaned with some acetone and left to air dry.
http://i1172.photobucket.com/albums/r567/Cubeman007/acetone.jpg

I ordered in a tube of good quality silicone that is used by many home builders of aquariums. I didn't need to do that for this part of the project as any old aquarium safe silicone would have done. However I will want some good stuff later when I do my all in one (AIO) conversion so figured I'd get it now.
http://i1172.photobucket.com/albums/r567/Cubeman007/silicone.jpg

The corners were taped up using painters tape and I went to work with the silicone and some gloves. I didn't actually use the tool shown for these corners as I prefer the control of my finger. However for silicone jobs that aren't visible afterwards (like bottom panes) that is what I would use.
http://i1172.photobucket.com/albums/r567/Cubeman007/newcorners.jpg

And when it is all said and done this is the end result.
http://i1172.photobucket.com/albums/r567/Cubeman007/postsilicone.jpg

Not something I would have cared about in my younger days but these little things matter to me now.

OrQidz
03/28/2013, 07:09 PM
cool! I have been thinking about doing a foam background (did one for a paludarium). I'm eager to see how your build goes!

Mr Cob
03/28/2013, 07:12 PM
all the tank builds I have done with attention to detail and I never once thought of cleaning up the sloppy silicone jobs...nice job!

Cubeman
03/28/2013, 07:57 PM
Thanks Mr Cob and OrQidz

I have always used sumps on my larger aquariums but ambient noise and space are an issue for the future location of this tank. I therefore subscribed to the KISS method and decided to make the tank into an all in one. The front pane and the right side are fully viewable so I had to keep that in mind when creating the AIO area.

I originally was going to use acrylic to make the divider thinking it would be cheaper than glass. I went to a plastics shop recommended by a fellow reefer and came away with a quote of $135 for 5 pieces of acrylic and 2 holes drilled. 4 of those 5 pieces were only 4 inches wide so the price caught me by surprise. Thinking I had nothing to lose I went to Payless Glass (shoutout!) in my hometown on the advice of another reefer and saved myself 50 bucks. 5mm glass, cut and drilled exactly the same as the acrylic specs, and no sharp edges. Couldn't be happier with the service I received there and saved myself any hassle with bonding acrylic to glass.

I designed the AIO area to cover 14 of the 20 inches across the back and be 4 inches in depth. This gave me enough room for my equipment (and future considerations), a clean viewing pane on the right side, and enough room to get my uber-manly hand inside and to the bottom when needed. That leaves a tank volume of 32 gallons so small enough to be included in Reef Central's Nano category :thumbsup:

Glass is cut.
http://i1172.photobucket.com/albums/r567/Cubeman007/glassarrives.jpg

Using my best clamps :) I placed the 3 pieces of glass that touch the top rim first. Glass was nice and square so they stood by themselves really well.
http://i1172.photobucket.com/albums/r567/Cubeman007/baffles1.jpg

I then placed the middle piece of glass for the bubble trap (kind of hard to see top down shot here).
http://i1172.photobucket.com/albums/r567/Cubeman007/baffles2.jpg

And then used my biggest clamp :lol: to secure the front piece a day later when the others had cured.
http://i1172.photobucket.com/albums/r567/Cubeman007/baffles3.jpg

And the final product with multi million dollar special effects. :spin2:
http://i1172.photobucket.com/albums/r567/Cubeman007/aiocomplete.jpg

Cubeman
03/29/2013, 08:37 PM
The next step was to start on the back rock wall. I actually started it while waiting for my glass to come in and the measurements turned out pretty well. I started with the plastic lighting egg crate cut to size, joined with zip ties, and attached a base plate to help hold it down with live rock once it is foamed and in the tank.
http://i1172.photobucket.com/albums/r567/Cubeman007/eggcrate1.jpg

I had previously given 3 pieces of old base rock a good cleaning and multiple freshwater rinses. I then smashed them up into suitable size pieces with a big hammer and gave them the high pressure hose treatment and set them aside to dry. Essentially I created small dead rocks from big old live rock. Here's what they looked like before and after.
http://i1172.photobucket.com/albums/r567/Cubeman007/prerock1.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/prerock2amp3.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/postrock.jpg

I then went about drilling holes in the rock big enough to push a zip tie through (smelled just like the dentist drilling a tooth!). I attached the rock to the egg crate using the lightest pieces of rock towards the top. The egg crate at this point is very flimsy and needs lots of support not to break. When closing the zip ties it is important to have the catch in the front and not the back of the egg crate. With the catches in the back it makes it difficult to get the egg crate to sit flat against the aquarium wall. I left enough space at the bottom of the vertical piece of egg crate to allow the placement of live rock up against the wall on the base plate. Here's what it looks like at this stage.
http://i1172.photobucket.com/albums/r567/Cubeman007/rockhang1.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/rockhang1side.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/rockhang1top.jpg

More to come...

nerdz
03/30/2013, 12:28 PM
Hey! I recognize that tank!

Looks great, keep up with updates

nanomania
03/30/2013, 12:49 PM
kool...

Cubeman
03/30/2013, 06:31 PM
Hey! I recognize that tank!


Hey nerdz, small world; you are absolutely correct, it was yours. Getting it ready for that free frag :D and having a fun build along the way.

nerdz
03/30/2013, 06:53 PM
Nice to progress at you own pace and do things right. free frag, for sure!

Cubeman
03/30/2013, 09:16 PM
So the next step was to start applying the foam. For this I purchased a 20oz can of black pond foam which is used to make waterfalls and seal pond rocks outside. It is more UV resistant than the standard yellow "Great Stuff" foam and also has "fish safe" stamped right on the can. Nothing against the Great Stuff foam, it's a lot cheaper and has been documented as used for these types of backgrounds. It is also about 1/4 of the price of the pond foam. If I was doing a huge tank I might have considered it but luckily for me I only needed one can so went with the pond stuff for more peace of mind for me.
http://i1172.photobucket.com/albums/r567/Cubeman007/pondfoam.jpg

I put the egg crate on its back and placed a garbage bag underneath. This would help stop the foam from pushing through and being wasted on the wrong side of the egg crate and also makes it easier to clean up afterwards. This is truly one of the messiest, stickiest substances to work with - gloves and old clothes are a must. I positioned the rocks to make them as prominent (least flat) as possible as the intention is to have them become shelves to place frags on when it is done.
http://i1172.photobucket.com/albums/r567/Cubeman007/preparetofoam.jpg

Then it was just a matter of spraying as little as possible for coverage knowing that the foam would expand somewhat. Here's a picture when it was first completed.
http://i1172.photobucket.com/albums/r567/Cubeman007/afterfoam1.jpg

And here's a picture about 15 minutes later when the foam has almost completely expanded. If you look just below the bottom-most rocks it is a good comparison.
http://i1172.photobucket.com/albums/r567/Cubeman007/foamfullexpansion.jpg

Here's a look at the can afterwards. I couldn't un-stick the glove.
http://i1172.photobucket.com/albums/r567/Cubeman007/afterfoamcan.jpg

Up next is making it look real...the arty part!

OrQidz
03/30/2013, 10:37 PM
looking great! Yeah that stuff is seriously sticky. I can't wait to see it in the tank.

Cubeman
03/30/2013, 11:24 PM
looking great!

haha you're too kind - this is the "looks like rock and black intestines" stage of the build. It gets much better!

nanomania
03/31/2013, 01:31 AM
kool....... where do u get this foam? im from india, but do u get online?

Cubeman
03/31/2013, 10:02 AM
kool....... where do u get this foam? im from india, but do u get online?

I bought mine at a landscape supply shop but there are brands available on Amazon.

maddmaxx
03/31/2013, 11:19 AM
lol sweet build so far, that pond foam is serious, i luv the glove stuck to the can. everytime i use this im shocked how sticky it is...

Cubeman
04/01/2013, 01:07 AM
I thought that because the main tank ended up at 32 gallons after the AIO conversion the Nano forum with its 34 gallon upper limit was the appropriate place to post. Apparently I was mistaken so the mods moved me in with the big fellas :spin3: . Onwards and upwards...

nanomania
04/01/2013, 10:00 PM
is it toxic in the begining? do u need to treat is with normal water?

Cubeman
04/02/2013, 12:37 AM
I gave the foam a day to finish expanding and cure and then took a sharp pointed knife and started cutting away the excess. I started with the back and sides because they don’t take a whole lot of thought. Before starting on the front I placed the frame in the aquarium to ensure the back/side fit was okay. It was good so bit of a relief there . The egg crate is no longer flimsy at this point because of the foam structure but is still subject to slight bending. Easy to carry around but still needed to be fully supported underneath when worked on.
http://i1172.photobucket.com/albums/r567/Cubeman007/firstfit-1.jpg

While it was in the tank I trimmed the top because I could use the tank frame as a guide on how much to cut away. It was then back outside to do the front. I wanted my end product to be as 3 dimensional as possible with the rocks standing out so I carved out a lot of the foam between and above them. I filled ¾ of the bathroom garbage can with the extra bits.
http://i1172.photobucket.com/albums/r567/Cubeman007/foamgarbage.jpg

I left the most foam at the bottom of the rocks to provide extra support for their weight and just gently carved the foam shape to match the rocks a bit better than the ‘intestine’ look. In a couple of spots I carved too much and exposed some small pieces of the zip ties which would have to be camouflaged later. Here’s a close up of the foam once it is carved; no longer smooth skinned but rather exposed air pockets.
http://i1172.photobucket.com/albums/r567/Cubeman007/foamcutaway.jpg

The next step once I was happy with the shape was to epoxy and sand. In preparation for this build I spent the most time researching the epoxies that other people had used. I know nothing about epoxy so had to reduce my search to 1) products that had been successfully used in a reef 2) products that were reasonably easy to locate and 3) products that didn’t only come in gallon buckets. I ended up following some European reefer advice and went to the locally hobby shop to buy epoxy that would be used on model boats/planes. I used 1 ½ packages of this 30 minute epoxy to complete the job.
http://i1172.photobucket.com/albums/r567/Cubeman007/fishtankbuild054.jpg

This same epoxy comes in different curing times like 5 minutes, 10 minutes, 20 minutes etc. labelled prominently on the package. When I compared the small print on the packages the curing time was directly proportional with its ability to used with water. E.g. the 5 min is no good for any water application, the 15 minute was water-resistant, and the 20 minute was the first one to state water-proof. Adding a little bit of security in my mind I went one better and bought the 30 minute blend. Then it was off to the dollar store to buy some bulk throw away paintbrushes to apply it with. Once you have used the epoxy the brushes are absolutely ruined so buy the cheapest ones you can find of suitable size. I ended up using 3 just to get this job done as they harden and become difficult along the way. The big brush on the right was not the right tool for the job - the smaller ones worked much better.
http://i1172.photobucket.com/albums/r567/Cubeman007/brushes.jpg

I had some sand from an old reef setup that I had rinsed a couple of weeks prior. It had been drying on a Rubbermaid lid in anticipation of this step. I mixed the epoxy a little bit at a time, coated it on to the foam one section at a time, and then liberally sprinkled sand all over it. Because of the shape of the background I had to keep rotating it in order to be able to sprinkle the sand and get it to stick. This was the longest part of the project taking me the better part of an afternoon but was also the most satisfying.

Here it is drying on the back steps.
http://i1172.photobucket.com/albums/r567/Cubeman007/drying.jpg

Next up is the installation and in tank shots.

Cubeman
04/02/2013, 12:42 AM
is it toxic in the begining? do u need to treat is with normal water?

I will be soaking it in freshwater with powerheads going once it is installed in the tank. This is more to do with getting rid of little bits of debris and just giving it a good rinse than it is about anything toxic.

nanomania
04/02/2013, 06:18 AM
kool..... thanks...

Cubeman
04/03/2013, 07:33 PM
I've now got the background in place in the aquarium. I put a light bead of silicone around the top back edge to hold it in place and gave it a couple of days to cure. Here's some pics from all angles of it in the dry tank.

From left side
http://i1172.photobucket.com/albums/r567/Cubeman007/leftside.jpg

Top down angle
http://i1172.photobucket.com/albums/r567/Cubeman007/topdownangle.jpg

Close up shot
http://i1172.photobucket.com/albums/r567/Cubeman007/closeup.jpg

Looking straight down
http://i1172.photobucket.com/albums/r567/Cubeman007/topdown.jpg

I forgot to mention that I had cut out overflows. Here's a close up look at them.
http://i1172.photobucket.com/albums/r567/Cubeman007/overflows.jpg

Here's a front on shot. The bottom portion will be covered by live rock placed on the base plate.
http://i1172.photobucket.com/albums/r567/Cubeman007/front.jpg

Overall I am pleased with how it turned out. Now looking forward to getting it wet.

Cubeman
04/06/2013, 07:38 PM
So I've finally got some salt water in the glass box and it is cycling on a coffee table while I work on the stand. I built some tall live rock structures to stand in front of the foam/rock wall using this:
http://i1172.photobucket.com/albums/r567/Cubeman007/coralepoxy.jpg

I don't have any lights yet so had difficulty getting good photos but here's a couple of wet ones using an Ikea bedside lamp.
http://i1172.photobucket.com/albums/r567/Cubeman007/cycle1.jpg

http://i1172.photobucket.com/albums/r567/Cubeman007/cycle3.jpg

And top down so you can see that there is actually some swimming room. And even though it looks like the top of the bommie is close to the front glass it is at least 2 inches away.
http://i1172.photobucket.com/albums/r567/Cubeman007/cycle2-1.jpg

MARINECRITTERS
04/06/2013, 07:46 PM
So far looking great, the natural aspect is really appealing. I am not sure if you already posted this but I will ask anyway, what type of filters or you running, skimmer, refugium, etc?. You should add some encrusting corals to the back wall, and maybe some tubastreas or other nps corals under the overhangs.

Can't wait to see more!

divinmike
04/06/2013, 08:31 PM
Wow this post gave me some great ideas thanks for the updates very creative.

Cubeman
04/07/2013, 10:25 AM
So far looking great, the natural aspect is really appealing. I am not sure if you already posted this but I will ask anyway, what type of filters or you running, skimmer, refugium, etc?.
Can't wait to see more!

Here's where I am at with the equipment

Aquarium specs:
37 gallon Marineland column aquarium. 20’’ long x 18” wide x 24” deep, black trimmed. Converted to an All in One (AIO) with a 14” x 4” equipment/filter area with 2 returns along the back left wall. This leaves 32 gallons of tank space.

Return pump:
Tunze Silence 1073.008 (210gph). This specific pump was purchased for its extremely quiet operation and low electrical demand (8W).

Flow:
Not purchased yet. Thinking of 2x Hydor Koralia 550 on timers.

Lighting:
Not purchased yet but am going LED with this one.

Filtration:
I have an old Red Sea Prizm HOB skimmer which has sat in the garage unused for 10 years. I designed the AIO compartments to accommodate this and like its very slim profile. I will be using it until it gives me a reason not to. My stocking is very light compared to most so the skimmer is hardly a requirement for this tank.

1x Two Little Fishes Phosban Reactor 150 with phosphate removal media.

Controller/Monitors:
Reef Keeper Lite

PinPoint pH and Temperature monitors

Heating/Cooling:
500W titanium heater controlled by the RKL. Seems like overkill but a) I already had it on hand b) my house gets cool (mid 60s F) at night c) the return pump circulation is quite low

Pacific Coast Mini Chiller (1/13HP) with 80gph throughput. Digital and adjustable so no need to run off the RKL.

Cubeman
04/07/2013, 10:26 AM
Wow this post gave me some great ideas thanks for the updates very creative.

Thanks divinmike!

Cubeman
04/13/2013, 10:15 PM
So the tank has been cycling in a spare room while I worked on the stand. My wife did not want the standard black Marineland stand that is made for this aquarium so I spent a few weeks browsing Craigslist for any piece of suitable furniture. I ended up buying what looked like a beat up 30 year old cabinet for $50 that looked like it could use a good refinishing job. Imagine my surprise when I got home and took a good look at the construction and found out what I had just purchased was actually an antique made in China in the late 1800's. Yep, I had one of "those" Craigslist finds!

Anyway I still needed an aquarium stand and knew that this one would have to be "modified" with a saw to open up the back if it was to fit the bill. Knowing full well this would de-value it I stared at the bloody thing for 2 weeks trying to get up the gumption to chop a hole in the back. Well I finally had a rotten day at work and out came the tools once I got home.

Here's how it went in pictures:

The cabinet, untouched on the outside except for a hole in the back, which is now being used as of today.
http://i1172.photobucket.com/albums/r567/Cubeman007/cabinet.jpg (http://s1172.photobucket.com/user/Cubeman007/media/cabinet.jpg.html)

The first bit of work I did on the inside was to cut an access hole and start reinforcing the frame. I thought the cabinet was sturdy enough but being as old as it was didn't want to take any chances. So I glued and screwed a bunch of supports around the existing framework and then stained the new wood dark so it matched a little better. You'll notice in this picture the doors are off and there are little shell shaped pivots where they fit into - no metal hinges at all, just all carved out of wood. This was at about the half way done stage.
http://i1172.photobucket.com/albums/r567/Cubeman007/b6189d96-a54b-4fa0-81c3-e170f3a95a36.jpg (http://s1172.photobucket.com/user/Cubeman007/media/b6189d96-a54b-4fa0-81c3-e170f3a95a36.jpg.html)

After I did the framework I put in a false back, side, and bottom (on the inside) so I would have something to screw my equipment to. There's not a lot of room so it's just holding 2 dosing pumps, Calcium and Alk containers, a Reef Keeper Lite, and a small chiller which is vented through the back.
http://i1172.photobucket.com/albums/r567/Cubeman007/inside.jpg (http://s1172.photobucket.com/user/Cubeman007/media/inside.jpg.html)

I also cut a 3/4inch piece of plywood and stained it to help support the tank and protect the top of the cabinet from salt water. Here's what the finished product looks like with the tank in place.
http://i1172.photobucket.com/albums/r567/Cubeman007/fulloncab.jpg (http://s1172.photobucket.com/user/Cubeman007/media/fulloncab.jpg.html)

Not to everybody's taste I know but the wife got a unique piece of 150 year old furniture that she is happy with and I finally got the aquarium in its ultimate resting place so I can continue with the build.

Derbird
04/13/2013, 10:32 PM
Wow, this is a very creative build. Can't wait to see what you do with it :)

Following along

nanomania
04/13/2013, 11:01 PM
beauty.....

thereeftank
04/14/2013, 06:04 AM
nice rock wall. liked the clam shells in it

dkeller_nc
04/14/2013, 08:08 AM
Cubeman -

A warning from someone that's a cabinetmaker specializing in colonial era reproductions with the tools and materials of the era. If you already know this, ignore.

All furniture built before the 1950's (and some built considerably after that) used animal hide glue on the joints. Hide glue has many advantages over modern PVA/Epoxy/Polyurethane glues for the cabinetmaker, one of which is reversibility upon exposure to heat and water.

In other words, hide glue will soften in high-humidity environments, like the inside of an aquarium stand! Potentially, your reinforcements may prevent this from being a problem. If you're uncertain about it (or risk averse), one way of correcting the issue is to completely dissasemble the piece with steam generated from an iron, and re-assemble it with modern PVA waterproof glue such as Titebond III. However, you may have a difficult time doing that without proper woodworker's clamps, and the clamps aren't cheap.

Cubeman
04/14/2013, 09:54 AM
Wow, this is a very creative build. Can't wait to see what you do with it :)

Following along

beauty.....

nice rock wall. liked the clam shells in it

Thanks gentlemen!

Cubeman
04/14/2013, 09:58 AM
Cubeman -

All furniture built before the 1950's (and some built considerably after that) used animal hide glue on the joints. Hide glue has many advantages over modern PVA/Epoxy/Polyurethane glues for the cabinetmaker, one of which is reversibility upon exposure to heat and water.



Thanks for this information, no I didn't know this. I'm in for a penny in for a pound now so will hope that what I've done on the inside is enough. It will be an interesting picture post on the forum if this is one of my life fails

dkeller_nc
04/14/2013, 01:04 PM
Thanks for this information, no I didn't know this. I'm in for a penny in for a pound now so will hope that what I've done on the inside is enough. It will be an interesting picture post on the forum if this is one of my life fails

I sincerely hope not - this is one of the times that I very much don't want to be correct!

I looked carefully at what I could see of your internal reinforcements. I suspect (but can't guarantee) that you won't suffer a catastrophic failure. If anything happens, you may simply notice some of the joints coming apart a bit. Probably the best indicator will be the drawers below the top - if the joints at the corner start loosening up, that may be your best indication that the hide glue is softening up a bit.

The nice thing about the scale of your tank is that even if you notice a problem, dealing with it won't be a huge catharsis. The same can't be said of a stand failure on a 180 gallon tank. I've participated in one of those, it definitely was a close shave to save the tank and its inhabitants - it took 4 of us until 3 or 4 a.m. to get everything torn down and put back up. It wasn't my tank, but I definitely felt sorry for the individual that owned it.

Cubeman
04/15/2013, 09:46 AM
Probably the best indicator will be the drawers below the top - if the joints at the corner start loosening up, that may be your best indication that the hide glue is softening up a bit.

Thanks for this tip. Now that I've shared it with my wife I'm sure she will be checking daily :bigeyes:

Cubeman
04/15/2013, 09:47 AM
I'm now using a couple of Koralia 750's for circulation and have placed them both right at the bottom of the aquarium in the back corners. They're hooked up to a digital timer so they take turns being on independently and simultaneously as well as both off for a few hours. The small base footprint and the large turnover creates a great upwelling of current from bottom to top.
http://i1172.photobucket.com/albums/r567/Cubeman007/koralia.jpg (http://s1172.photobucket.com/user/Cubeman007/media/koralia.jpg.html)

The problem this much bottom current created is I couldn't use my existing Fiji pink sand as it was too fine and would be stripped bare in certain spots and piled up in others. I picked up some coarser reef sand yesterday and because I only needed 20lbs the difference in price between live and dead was negligible so I picked up the live.
http://i1172.photobucket.com/albums/r567/Cubeman007/0012.jpg (http://s1172.photobucket.com/user/Cubeman007/media/0012.jpg.html)

The tank was pretty cloudy for the rest of the day but was crystal clear 18 hours later. Left a bit of a "bathtub ring" around the top edge but that was easily cleaned with a filter sponge.

Cubeman
04/15/2013, 08:34 PM
One of the problems that has presented itself is one of the cords from a power-head. It was my intention to tuck the cords between the glass and the rock wall but one side was just too snug so it ended up looking like this.
http://i1172.photobucket.com/albums/r567/Cubeman007/cordproblem.jpg (http://s1172.photobucket.com/user/Cubeman007/media/cordproblem.jpg.html)

Not wanting it to remain as visually distracting I took an old 18inch Eheim spray bar that I'd held onto for over a decade for just this exact reason and cut a slit in it lengthways.
http://i1172.photobucket.com/albums/r567/Cubeman007/pipe.jpg (http://s1172.photobucket.com/user/Cubeman007/media/pipe.jpg.html)

I applied the same epoxy and sand treatment to it as I did to the back wall making it look like this.
http://i1172.photobucket.com/albums/r567/Cubeman007/cordcover.jpg (http://s1172.photobucket.com/user/Cubeman007/media/cordcover.jpg.html)

I then squeezed the powerhead cord through the opening so it eventually slid freely inside the spray bar and placed it in the tank.

Close up of bottom cord entering spray bar from powerhead.
http://i1172.photobucket.com/albums/r567/Cubeman007/cordclose.jpg (http://s1172.photobucket.com/user/Cubeman007/media/cordclose.jpg.html)

And the whole thing in place.
http://i1172.photobucket.com/albums/r567/Cubeman007/cordbig.jpg (http://s1172.photobucket.com/user/Cubeman007/media/cordbig.jpg.html)

Obviously looks a little artificial right now in the newly set up gleaming white tank but figure once there is some coralline on it and a few corals in front of it I will be happier than if I'd just left the bare cord.

nanomania
04/15/2013, 09:54 PM
nice...... wherz the sump/skimmer?

Cubeman
04/16/2013, 05:57 PM
The skimmer is in the back left corner and there is no need for a sump with this tank because it is now an "all in one" (AIO). Anything that would have gone into the sump (heater, skimmer, filter media, pump etc.) is now in the part of the aquarium behind the rockwall.

Cubeman
04/21/2013, 10:47 AM
The 500W titanium heater I was using has turned out to be too much heater for the water volume so I have downsized. Every time the heater turned on it got so warm so quickly that the temperature would rise 0.3-0.5 degrees and then slowly cool off again. Not exactly the steady temp we shoot for so I picked up a 100W Jager. I set the Jager to 82 degrees while the Reef Keeper Lite that controls it is set to 79. This way when the RKL calls for heat the Jager is always on but if the RKL temp control sticks on then the Jager's internal mechanism should stop the tank from overheating.
http://i1172.photobucket.com/albums/r567/Cubeman007/0062.jpg (http://s1172.photobucket.com/user/Cubeman007/media/0062.jpg.html)

I had Payless Glass cut a 5mm glass top to cover the display portion of the aquarium. This leaves the all in one box free for gas exchange and I also have a small gap in the back right hand corner for feeding. To help with condensation and salt on the underside of glass top I decided not to place it on the lip inside the frame. Instead I had the glass cut to the external dimensions of the black plastic frame and placed little rubber supports on it. This keeps it up off the rim allowing a bit of air exchange but still prevents fish from getting out. The rubber legs have the added benefit of not wanting to slide so it will be difficult to accidentally knock the glass top off. It's a bit of a sacrifice with the aesthetics but I can live with that if I don't have to clean salt off the top every week.
http://i1172.photobucket.com/albums/r567/Cubeman007/0023.jpg (http://s1172.photobucket.com/user/Cubeman007/media/0023.jpg.html)

http://i1172.photobucket.com/albums/r567/Cubeman007/005-1.jpg (http://s1172.photobucket.com/user/Cubeman007/media/005-1.jpg.html)

http://i1172.photobucket.com/albums/r567/Cubeman007/0042.jpg (http://s1172.photobucket.com/user/Cubeman007/media/0042.jpg.html)

Cubeman
04/21/2013, 06:22 PM
Cord/flex-hose management behind the aquarium was the next task as the whole mess could be seen easily from the side when sitting on the couch. I bought an 8ft section of pipe insulating foam from the hardware store. It's cut lengthways when you buy it and comes in several different diameters.
http://i1172.photobucket.com/albums/r567/Cubeman007/013.jpg (http://s1172.photobucket.com/user/Cubeman007/media/013.jpg.html)

I routed all of the cords and hose through it then I zap strapped the pieces of foam together. A definite improvement over seeing the 5 cords and 4 hoses that were hanging there before.
http://i1172.photobucket.com/albums/r567/Cubeman007/012.jpg (http://s1172.photobucket.com/user/Cubeman007/media/012.jpg.html)

Yes I know there is one cord hanging out by itself in the background that stands out but that piece of equipment is temporary :D

codyreed29
04/21/2013, 07:48 PM
You got that zoo tank look. Nice tank Done well so far I will follow along.

Cubeman
04/23/2013, 09:16 PM
Pretty good day in the Cubeman household when you come home from work and find this on the table with a Reef Supply Canada label.
http://i1172.photobucket.com/albums/r567/Cubeman007/001-1.jpg (http://s1172.photobucket.com/user/Cubeman007/media/001-1.jpg.html)

And if you didn't already guess from the first picture this is what was inside.
http://i1172.photobucket.com/albums/r567/Cubeman007/004.jpg (http://s1172.photobucket.com/user/Cubeman007/media/004.jpg.html)

http://i1172.photobucket.com/albums/r567/Cubeman007/003-1.jpg (http://s1172.photobucket.com/user/Cubeman007/media/003-1.jpg.html)

The tank is only 20 inches wide and the fixture is 16 inches so no need for any height above the tank for spread. The better half absolutely does not want it hanging from cables in the front room so it's just sitting on some plumbing elbows for now while I figure out some DIY legs.
http://i1172.photobucket.com/albums/r567/Cubeman007/005-2.jpg (http://s1172.photobucket.com/user/Cubeman007/media/005-2.jpg.html)

http://i1172.photobucket.com/albums/r567/Cubeman007/006.jpg (http://s1172.photobucket.com/user/Cubeman007/media/006.jpg.html)

I imagine I will be playing with the settings a lot over the next few days. I'm no LED scientist but I'll let you know how I like it. It also is not that blue in person so apparently I'm no photo surgeon either :rolleyes:

Cubeman
04/23/2013, 09:24 PM
You got that zoo tank look. Nice tank Done well so far I will follow along.

Thanks very much!

Cubeman
04/29/2013, 11:02 PM
Over the past week I have been scratching my head about what to do about legs for the light. Scroll back and you'll read that my wife didn't want it hanging from the supplied cables in the living room. I just needed something to raise it up off the glass about an inch or so. I tried cutting some wood - looked like crap. I tried cutting some plastic pipe - looked like crap. I tried wedge shaped door stops - wife said it looked like crap. So I find myself at the dollar store and another rather dim light bulb :idea: went off in my head when I saw these baby head savers or whatever they are called.
http://i1172.photobucket.com/albums/r567/Cubeman007/legs.jpg (http://s1172.photobucket.com/user/Cubeman007/media/legs.jpg.html)

For $1.25 I couldn't go wrong so I bought two sets. This is what they look like out of the package. They're rounded on the corners too just like the light - it was like a match made in heaven.
http://i1172.photobucket.com/albums/r567/Cubeman007/leg.jpg (http://s1172.photobucket.com/user/Cubeman007/media/leg.jpg.html)

I liked the look of just one set under the light but I wanted just a titch more spread so I ended up going with two on each corner for the extra height. Looks like this.
http://i1172.photobucket.com/albums/r567/Cubeman007/front-1.jpg (http://s1172.photobucket.com/user/Cubeman007/media/front-1.jpg.html)

So now I just need to align them properly and glue them together so they look a little neater. Leg problem solved until I see something better. :rollface:

maddmaxx
04/30/2013, 02:18 PM
awesome build here. looks sweet. do you get good flow with the koralias? they seem kinda blocked...

Cubeman
04/30/2013, 10:06 PM
awesome build here. looks sweet. do you get good flow with the koralias? they seem kinda blocked...

Thanks. Plenty of flow from the powerheads, the pictures are deceiving as they are wide open in front. Mostly random turbulence in the bottom half as the streams bounce of the walls and rocks and then the flow moves up the front glass and sweeps down the back wall. 2x 750gph in the 20"x14" base footprint may prove to be too much for any fish that eventually end up in there - will have to wait and see.

Cubeman
05/07/2013, 09:25 PM
The tank is just finishing the awkward first algae bloom stage that has lasted about 5 days. The clean up crew of 3 hermits and a dozen large mixed snails are gaining the upper hand without me having to pull out the old toothbrush. I've had a self sustaining population of margarita snails for about 6 years and as soon as the algae started to grow they had a mass spawning event - pretty cool. I expect to start seeing small snails everywhere soon of which a few will grow to adulthood which has been the typical cycle for them in the past.

My first try with LED lighting is proving to be a learning experience. I originally had the unit maxing out at 60 percent for 4 hrs and tapering on/off for the other 4hrs on both ends of a 12 hr cycle. I took some ugly old frags from another tank that were sitting under a 250w MH and placed them around the tank in the bottom 6 inches or so and observed how they reacted. Within 2 days some had faded badly to the point of looking bleached. Within a week others that were no more than brown lumps to start with showed remarkable colour change and growth. By trial and error I have found my areas of highest par (no meter for this poor boy), moved the corals accordingly, and ramped the lights down to 40 percent max for now. My plan is to ramp up 5% per week until I find the sweet spot. Overall I'm really pleased with the LED light and at this point in time couldn't imagine going back to MH or fluorescent bulbs.

A post isn't complete without pictures so here's a good thing from this week. I received a great box from a "Tank of the Month" hobbyist on another forum. The water was a decidedly cool 71 degrees upon arrival on a sunny afternoon so I was fearing the worst for what they may have encountered the night before. They were well insulated with two heat packs but sometimes with shipping you takes yer chances.
http://i1172.photobucket.com/albums/r567/Cubeman007/002-1.jpg (http://s1172.photobucket.com/user/Cubeman007/media/002-1.jpg.html)

No sooner had they been unpacked and I had to go to work for 8 hours. So I left strict instructions and a turkey baster with the better half and the corals had a 9 hour acclimation until I got home close to midnight.
http://i1172.photobucket.com/albums/r567/Cubeman007/004-2.jpg (http://s1172.photobucket.com/user/Cubeman007/media/004-2.jpg.html)

The most fun was comparing the size of the bristle worms that were hidden under each piece of styrofoam. Must of ended up with about 50 of the buggers plus a few small stars.

I haven't got the hang of the shooting through the glass AND getting the right colours yet but here's a few of my better shots of some of my existing pieces and the corals that shipped in.

http://i1172.photobucket.com/albums/r567/Cubeman007/009.jpg (http://s1172.photobucket.com/user/Cubeman007/media/009.jpg.html)

I think this is a green cactus coral that has encrusted but hasn't sent up its "leaves" yet.
http://i1172.photobucket.com/albums/r567/Cubeman007/011-2.jpg (http://s1172.photobucket.com/user/Cubeman007/media/011-2.jpg.html)

Purple Pocillapora
http://i1172.photobucket.com/albums/r567/Cubeman007/012-2.jpg (http://s1172.photobucket.com/user/Cubeman007/media/012-2.jpg.html)

Red monti (got a green and purple as well)
http://i1172.photobucket.com/albums/r567/Cubeman007/014.jpg (http://s1172.photobucket.com/user/Cubeman007/media/014.jpg.html)

Green with purple tips acropora
http://i1172.photobucket.com/albums/r567/Cubeman007/016.jpg (http://s1172.photobucket.com/user/Cubeman007/media/016.jpg.html)

Cubeman
05/15/2013, 05:51 PM
More of a progress report than anything this week. The CUC has done its job and taken care of the algae on the rocks. I am still getting a generous green film on the glass that needs to be cleaned daily but this too shall pass.

One of my scarlet hermits crawled out of the water and sat on top of the rock wall until he dessicated. Literally within an inch of the waters edge and he chose to sit still and die. The intelligence of hermits went down a notch in my estimation with this event. Anyway I pulled him out of his shell and fed the cleaner shrimps with it. This may not have been a smart thing to do as now the larger shrimp is grabbing at the remaining living hermit thinking it would make a good meal. I'm guessing the shrimp will give up once he loses a leg.

Slowly getting a handle on how much Calcium and Alk to add to my two fresh water top offs so that the levels remain constant. The worst part about this dialing in stage is the time it takes to do multiple water tests each week as you track the changes you make in concentration against the results.

I have close to 20 sps frags in the tank now, 9 from my other systems and 11 that are new. I have another 7 being shipped in on Friday from Fragalot. Other than 2 encrusting monti's that bleached under the LED's and haven't regained their colour the rest are doing fantastic. Couldn't be happier with the colour and polyp extension.

The rock wall is no longer gleaming white and sterile but it has not gained any coralline to speak of yet. The live rocks however are purpling up nicely. The wall is however home to a magnificent number of organisms that come out under the moon lights.

I'll end with a FTS just so I can mark the progress of the tank. I should call this one "How to hide 20 frags in a 37 gallon tank" :fun4:
http://i1172.photobucket.com/albums/r567/Cubeman007/004-3.jpg (http://s1172.photobucket.com/user/Cubeman007/media/004-3.jpg.html)

Cubeman
05/17/2013, 09:13 PM
Received some frags through overnight shipping today. I ordered 7 and received 2 extras so that was a pretty nice surprise.
http://i1172.photobucket.com/albums/r567/Cubeman007/002-2.jpg (http://s1172.photobucket.com/user/Cubeman007/media/002-2.jpg.html)

One almost DOA was a purple hairy acropora that had fouled its water badly - man did it smell rank. I gave it a quick acclimation and dip and it shed about 80 percent of its flesh - into the shade with it and we'll see if it recovers at all. Also one montipora had this nasty little bugger with it and a second one dropped out during the dip.
http://i1172.photobucket.com/albums/r567/Cubeman007/005-4.jpg (http://s1172.photobucket.com/user/Cubeman007/media/005-4.jpg.html)

Also upgraded the skimmer today from the Prizm Pro which was just too noisy to remain in the front room to the Tunze 9004. So far so good on its performance but it has only been running for a couple of hours - it is definitely almost silent though which was the main reason for the change.

SVTour
05/19/2013, 08:08 AM
This was a really cool build...thanks for sharing.

Are you concerned about getting too much salt coverage on the glass that is on top of the tank and having it block some of the light?

Cubeman
05/21/2013, 01:39 AM
This was a really cool build...thanks for sharing.

Are you concerned about getting too much salt coverage on the glass that is on top of the tank and having it block some of the light?

Thanks very much!

So far I have had zero salt coverage on the glass - it hasn't been an issue. There is no bubble spray and there's enough space and air flow above the water to prevent condensation from occurring.

If it becomes an issue I likely still wouldn't be concerned because I don't think the lights are going to get turned up past 60 percent. There's plenty more brightness to be had from them if the cover gets somewhat crusty over time.

Cubeman
05/27/2013, 08:22 PM
Lost 4 frags in that last shipment (1 DOA and 3 due to the monti eating nudi's). Rest of the tank is doing well but am beginning to think I will not be turning the light up past 50 percent as there is significant coral colour lightening occurring for anything not in the shade regardless of where it is height wise. I will leave the "white" channel at 50 percent and play with the blue channel to gain a blend that is pleasing to my eye.

My Tunze 9004 skimmer has reacted badly only once and overflowed but other than that has behaved admirably for a small skimmer. Within 2 days of it running I stopped getting daily algae on the glass and am now having to use the cleaning magnet 1-2 times per week instead of every day. Still giving me some microbubbles but not a lot of tweaking can be done with this model so am hoping it sorts itself out as it matures. If anyone with the same model has any advice please chime up!

No fish yet but I added a couple of porcelain crabs this week. One was the standard colour and the other is a blue/purple colour. I've only seen the regular one a couple of times but the blue one is out in the open all the time actively straining the water column so I snapped this picture today.

http://i1172.photobucket.com/albums/r567/Cubeman007/purpleporcelain.jpg (http://s1172.photobucket.com/user/Cubeman007/media/purpleporcelain.jpg.html)

Go29
05/27/2013, 09:04 PM
wow love the build and tank. That rock wall is just phenomenal :thumbsup: What are your future plans for fish ( if any)? Again congrats on the gorgeous build, and keep the pics coming!

Cubeman
05/28/2013, 09:18 AM
wow love the build and tank. That rock wall is just phenomenal :thumbsup: What are your future plans for fish ( if any)? Again congrats on the gorgeous build, and keep the pics coming!

Thanks for the compliment Go29! I am looking at a pink streaked wrasse or a possum wrasse as my main 'swimming' fish in the tank. Right now the wall is proving to be great refugium for copepods so am waiting for their population to reach its peak and establish before I add a small pod predator like a wrasse. Other fish will be small gobies that will hang on the wall such as ORA neon or sharknose gobies. If I end up with an algae problem at any point then my goto fish would be a tail spot blenny.