PDA

View Full Version : Newbie having trouble with feed modes


DaytonaJoe
05/29/2013, 01:59 PM
I am certain I understand the basics of how feed modes should work, but nothing is shutting down when I activate mode A. Here's the code that's in my return pump:

Fallback ON
If FeedA 000 Then OFF


and my skimmer:
Fallback ON
If FeedA 005 Then OFF

It seems right based on what I've read.. what else could cause the pumps to remain active during feed mode?

Edit: Solved my own problem, I had the outlets on Manual On which was preventing feed mode from activating.

ska d
05/29/2013, 02:32 PM
Doh! Done that a couple times myself

RussM
05/29/2013, 03:24 PM
You have nothing to turn on the outlets. Add Set ON after the Fallback ON lines.

DaytonaJoe
05/29/2013, 08:02 PM
You have nothing to turn on the outlets. Add Set ON after the Fallback ON lines.

Oops, yup I forgot to included that was the other thing I had to change. Thanks!