View Full Version : Close loop ideas, 12mm glass tank owners.
Reefocd
06/08/2013, 10:23 AM
I am planning a new shallow reef tank (3 side starphire, 66" x 24" x 22"h of 12mm glass non-tempered bottom top and bottom eurobraced, may or may not add front to back center bracing.
What I am asking;
Walk through your decision process to PROCEED with close loop and have glass drilled.
How many holes drilled? Placement? Pic would be welcome too.
I had closed loop in bottom of 150g acrylic tank with no issues. I did notice there is always pump vibration that occurs.
And.... Of course, if you had glass failure, please discuss.
Mudbeaver
06/08/2013, 08:08 PM
I am planning a new shallow reef tank (3 side starphire, 66" x 24" x 22"h of 12mm glass non-tempered bottom top and bottom eurobraced, may or may not add front to back center bracing.
What I am asking;
Walk through your decision process to PROCEED with close loop and have glass drilled.
How many holes drilled? Placement? Pic would be welcome too.
I had closed loop in bottom of 150g acrylic tank with no issues. I did notice there is always pump vibration that occurs.
And.... Of course, if you had glass failure, please discuss.
Well what a coincidence i'm also having a system with closed loop starfire glass tanks but its a 3 tank system, on a 3 level stand. you should look at my thread i have plans and pictures lol we're in the same soup sort of speak. I had such issues that my LFS offered me the services of a pro aquatank engenier to the rescue lol.
Reefocd
06/08/2013, 11:50 PM
I will checkout your thread for sure, thanks!
wonrib00
06/09/2013, 12:42 AM
I did a closed loop on my tank, drilled the holes too. When drilling a tank, make sure you are drilling into a piece of wood, and have a hole cut out that is acting as a jig. The jig will help stop hole saw from bouncing around. Use plenty of water, I used gliciren, plenty of it.
The inlet is at the top to avoid any sand that may get stirred up:
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps4d7c57f8.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps4d7c57f8.jpg.html)
This shows the inlet coming in and along the base of the aquarium. The PVC was later covered by sand.
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps4953140c.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps4953140c.jpg.html)
The plumbing is 1" in most places, plumbed down to 3/4" at the narrowest. There are a total of six points that shoot water at the rock.
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps0d1970d4.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps0d1970d4.jpg.html)
Cutting the holes, nerves of steel!
Mudbeaver
06/09/2013, 04:55 AM
I did a closed loop on my tank, drilled the holes too. When drilling a tank, make sure you are drilling into a piece of wood, and have a hole cut out that is acting as a jig. The jig will help stop hole saw from bouncing around. Use plenty of water, I used gliciren, plenty of it.
The inlet is at the top to avoid any sand that may get stirred up:
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps4d7c57f8.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps4d7c57f8.jpg.html)
This shows the inlet coming in and along the base of the aquarium. The PVC was later covered by sand.
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps4953140c.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps4953140c.jpg.html)
The plumbing is 1" in most places, plumbed down to 3/4" at the narrowest. There are a total of six points that shoot water at the rock.
http://i1302.photobucket.com/albums/ag125/wonrib00/image_zps0d1970d4.jpg (http://s1302.photobucket.com/user/wonrib00/media/image_zps0d1970d4.jpg.html)
Cutting the holes, nerves of steel!
Very nice man , wow on your return i'm aiming in that direction too. Although its not my picture this is what i'm shooting for .
http://i434.photobucket.com/albums/qq68/Basilesim/Nouveaux%20chapitre%202013/DSC_0109.jpg
This is a sculpture i did in my last tank ; i'll use some of that technique on those rods and pvc pipes to hide them and the accelerator nosle
http://i434.photobucket.com/albums/qq68/Basilesim/La%2067%20gallons/Photo277.jpg
wonrib00
06/09/2013, 09:12 AM
Nice and open rock work. Looks sweet.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.