PDA

View Full Version : Ozone reactor questions


jwalker314
06/11/2013, 09:03 AM
Two quick questions.

I have an Avast Mutiny 2 Ozone reactor. The older style with the venturi input. I believe where this screws in on top is leaking, what is the best way to screw that top part in to prevent leaks? I have wrapped it in a bunch of teflon tape to try and seal the threads.

Also are there issues with the Dwyer meters failing? I purchased a 1-10 SCFM meter elsewhere (Dwyer brand, same type as OEM one pretty much) the red ball inside appeared to melt and lost all its red color.

I am running a Mag 7 pump and a posiden p303 with upgraded dual pump (6scfm) is this too fast of a flow for this model reactor?

thanks for your time.

Avast Marine
06/13/2013, 07:33 AM
Hi jwalker314,

Can you submit a ticket through the contact form on our website? The dwyers meters we use are ozone safe, not sure about the one with the red ball. 6scfm is a lot and is probably creating too much pressure inside the reactor causing the leak in the top. Either way though do submit the ticket so we can work with you to resolve the issues.