Mh reflector for 36x36x24 cube

[Hoodrich]

Hi I'm planning on going to halides. Looking for a reflector for a 36x36x24 cube tank. Planning on using a single radium 250 or 400. Thanks in advance.

[Nanook]

Lumenarc III full size.

[James77]

Any of the large reflectors would work....even with a 250w Radium. Use a magnetic M80 ballast if you go the 250w Radium route...it runs best on that and has great intensity

[tgbaby1]

I used a Hamilton Cozumel Sun over a 36 x 36 x 18 and it had great spread.

[Showdizzle]

I just bought a dual pfo 250 watt hqi ballast with de sockets. I want to run radium 20k's on this set up does anyone have a link to a conversion cord or kit that i can buy.

[opusthepenguin]

Hamilton Cozumel Sun
30x30 cube here and it covers it great

[Hoodrich]

I want to use a Hamilton Cozumel sun reflector but I have a m80 pfo ballast and this reflectors male plug is not the same as by ballast. Van I splice my pfo cord or wire it directly to socket?

Ty!

[williewilliams]

showdizzle, I don't think radiums come in double ended for the 250w. I run them and couldn't be happier.

[Michigan Mike]

I just bought a dual pfo 250 watt hqi ballast with de sockets. I want to run radium 20k's on this set up does anyone have a link to a conversion cord or kit that i can buy.

Above post is correct, try Phoenix bulbs because there are no 250w d.e. Radiums.

[Hoodrich]

No way to convert a pfo hqi ballast to se.

[deepseadan]

Hamilton Cozumel Sun
30x30 cube here and it covers it great

I agree, this is the reflector to get.

[kmu]

Hamilton Cozumel Sun
30x30 cube here and it covers it great

Im running one in a 48"x48"x24" cube with excellent results with a 250 watt radium 20K bulb