PDA

View Full Version : Deltec Equipment Vendor in the United States.

B1N4RY
08/24/2013, 11:21 AM
So I may just have been extremely tired but I have been looking for a vendor that sells Deltec Equipment here in the United States and I'm not having much luck. I have some expansion ideas for my aquarium but they are mostly dependent on finding the Deltec equipment. Any thoughts?
Vinny Kreyling
08/24/2013, 06:38 PM
Marvin Vandelinde
D&D the Aquarium Solution USA LLC
9096 East Branch Drive
Scottsdale, AZ 85260
1-888-335-8328
1-804-612-0588
marvin@theaquariumsolution.com
www.theaquariumsolution.com
moondoggy4
08/24/2013, 07:44 PM
Wow Marvin moved from the east coast.
B1N4RY
08/27/2013, 04:32 PM
Marvin Vandelinde
D&D the Aquarium Solution USA LLC
9096 East Branch Drive
Scottsdale, AZ 85260
1-888-335-8328
1-804-612-0588
marvin@theaquariumsolution.com
www.theaquariumsolution.com

Thank you for the information. I will give him a call tomorrow and see if her can get me what I need.
B1N4RY
08/28/2013, 08:09 AM
I sent an email because the telephone number is disconnected.
ABlueReef
08/28/2013, 08:30 AM
Good Luck with this, as I have tried contacting deltec for spare parts 6 months agofor a few of my skimmers. I was lucky to get one return call, but when I called back to place the order all the calls went to a back hole, so I gave up. Sold all my deltec equipment and am no longer a fan. Its a shame, great products, but lack of support.
rocknut
08/28/2013, 11:12 AM
That is too bad. I purchased several items directly from Marvin a few years ago, and actually had really good luck with support. I just looked up the address in Arizona, and it is about 1/4 mile from my office, but it shows a residential house on the Google Map?
B1N4RY
08/28/2013, 01:56 PM
Yeah, I think with all this trouble of getting the equipment here in the United States that have gone with a few other manufacturers currently.
Vinny Kreyling
08/28/2013, 02:20 PM
Well they should be @ MACNA, I will get a new business card.
reefinder
08/28/2013, 02:42 PM
Yeah it's a Shame I've tried as well and it's impossible for my vendor to do buisness with him
ThaBeast
08/28/2013, 03:11 PM
Marvin's in Virginia, I think that address is suspect?
Vinny Kreyling
09/03/2013, 09:09 AM
Saw Marvin @ MACNA & got the scoop.
Deltec is a FORGET ABOUT IT!!!!!!
No longer available in the US.
B1N4RY
09/03/2013, 09:31 AM
Saw Marvin @ MACNA & got the scoop.
Deltec is a FORGET ABOUT IT!!!!!!
No longer available in the US.

That sucks.. Guess I have to move to Europe. :headwally:
liquidfunk
09/03/2013, 10:32 AM
You can still get parts and support from Xenia North America if needed. Give them a call.
http://www.xeniainc.com/
moondoggy4
09/03/2013, 10:52 AM
Sorry to hear that about Deltec/Marvin. You could contact the rep in Canada maybe he could setup a Canada/USA distribution hub.
B1N4RY
09/04/2013, 12:36 AM
I am sad because I really want a Deltec Nitrate Reactor. I guess I will have to do some searching.
saj01c
09/04/2013, 01:51 AM
I contacted the rep in Canada and he was very helpful. I needed a new pump for my calcium reactor and he took care of me. I would give him a call.
B1N4RY
09/04/2013, 01:59 AM
I contacted the rep in Canada and he was very helpful. I needed a new pump for my calcium reactor and he took care of me. I would give him a call.

Can you provide me with the contact information for the representative in Canada?
saj01c
09/04/2013, 02:06 AM
Phil Gilbert D-D USA
Tel: 1-866-721-7445
Mail: phil@theaquariumsolution.com
B1N4RY
09/04/2013, 02:09 AM
Phil Gilbert D-D USA
Tel: 1-866-721-7445
Mail: phil@theaquariumsolution.com

Thank you!
reef bloke
09/04/2013, 04:26 AM
Phil will sell you any Deltec into the U.S, he is very good.
moondoggy4
09/04/2013, 05:32 PM
I have a Deltec Nitrate reactor.
B1N4RY
09/04/2013, 11:34 PM
I have a Deltec Nitrate reactor.

How do you like it?
moondoggy4
09/04/2013, 11:40 PM
I took it off line because the difficult part is getting a good reliable feed pump doing 36 ml/min, I tired a aqua lifter and that wasn't effective got a rotten egg smell so i took it down I had a DD 36 ml/min peri pump from Deltec and it would rattle and make too much noise. I also have the 1ml/mn pump from them that one works great.
B1N4RY
09/04/2013, 11:44 PM
I took it off line because the difficult part is getting a good reliable feed pump doing 36 ml/min, I tired a aqua lifter and that wasn't effective got a rotten egg smell so i took it down I had a DD 36 ml/min peri pump from Deltec and it would rattle and make too much noise. I also have the 1ml/mn pump from them that one works great.

Are you using the Carbon Fluid directly from Deltec to feed the reactor? If I purchased one I would be feeding it using a doser such as a Profilux.
moondoggy4
09/05/2013, 12:07 AM
Profllux cannot be ran 24/7 but they are great for the liquid doser. I used to run the liquid from Deltec I believe that it is the same as Red Sea's NO3-PO4-X you could also use diluted vodka.
B1N4RY
09/05/2013, 05:11 AM
Profllux cannot be ran 24/7 but they are great for the liquid doser. I used to run the liquid from Deltec I believe that it is the same as Red Sea's NO3-PO4-X you could also use diluted vodka.

Okay, great. Well talk about this more after I do some more research.
dsmooth
09/05/2013, 06:01 AM
Phil Gilbert D-D USA
Tel: 1-866-721-7445
Mail: phil@theaquariumsolution.com

I spoke with him this morning, and he is all ready getting the impeller that I needed for my MCE300 HOB. Trying to order it or a year. thx
B1N4RY
09/05/2013, 08:46 AM
I spoke with him this morning, and he is all ready getting the impeller that I needed for my MCE300 HOB. Trying to order it or a year. thx

That is awesome. I will give him a call on my lunch break to discuss the de-Nitrification Reactor.