Need Suggestion...

[Lucky1s]

I'd like to pickup a new pump for the return and not sure what route to go. Tank is not drilled and I'm running about 5 feet from the pump to the out flow with a 4 foot rise.

Need some suggestions on a pump.

Thanks,
Rob

[jdezek]

It depends on the size over flow you have as well

[Vinny Kreyling]

@ 3 X turnover you are looking @ 750GPH.
A single overflow box is usually 600GPH.
You will need either a dual overflow box or 2 singles.
Use the RC calculator to figure head and pipe loss.
This will give you an idea of what you need.

[Lucky1s]

There are not any markings on the overflow and I do not have room to add another due to the tank being flushed mounted in the livingroom with a "clean" view into the office on the other side. It is a tight fit right now...

The return is on one side of the tank with the overflow on the other end. I can take some pictures if that will help on suggestions.