Huge clear out dont miss this

[AQD_ottawa]

ProfiLux owners this you cant miss out on!

GHL needs to clear some stock of older style powerbars so we have been authorized to do a direct sale at factory manufacture cost of older style power bars that can be used on ANY ProfiLux controller.

All products have full warranties.

Power Bar 6D (NOT the PAB version)
=$99.00

Expansion socket for running high loads off of your power bar
= $34.00

STDL analogue power bar
= $44.00

All above work with P3 and P2

Due to the nature and price of this sale, products are ordered from Germany on an order by order basis so there will be pre payment required and up to 4 week wait in some cases for delivery.

shipping rates apply as this is at cost sale. We are not making a dime on this, its simply ex works clearance.

To order drop us an email at info@ghlna.com

Few other items to be listed also later this week.

[AQD_ottawa]

To be on the first wave of orders we must have your order by This Monday email info@ghlna.com

[moondoggy4]

I have the base base unit, I have bought the 4 way power bar and and I also bought the two led strip lights, anything else that I can add to it? Thanks in advance

[AQD_ottawa]

6 socket power bar

from there on a whole host of options, check out www.ghlna.com and go through all the parts. ;)

[AQD_ottawa]

First wave has been ordered for shipping from GHL to us, now we are working on the second wave, deal still on until all stock gone no matter how long it takes to clear the stock! :)

[glang]

Can you please explain what the purpose of the "expansion socket" is? Does it plug into a power bar to split a single socket into two sockets?

[AQD_ottawa]

Hi

the expansion box has two sockets on it but they switch together not independently. The purpose of the unit is to take the load off the main power bar for items such as chillers or other high amp devices.

There are two AC leads on the expansion socket.

Lead #1 is the control lead this plugs into the 6 socket power bar and you program the power bar as you normally would do to switch that socket on and off, just as if the high load was connected directly to the 6 socket power bar. This switched line acts as a signal line to the high amp relays inside the expansion socket and thus triggering an On event or off event

Lead #2 Plugs into any wall socket preferably not the same as the 6 socket power bar, this is the AC feed that power the two expansion sockets.

And thus you have isolated a high amp load away from the main power bar and able to run safely high amp devices without risk of overload.

[shaginwagon13]

Can I place an order for the Expansion socket?

[AQD_ottawa]

we are building orders now for the November shipment, please email us at info@ghlna.com to be on the list.

[AQD_ottawa]

Can I place an order for the Expansion socket?

replied to your email but it bounced back but i have got them coming in for you.

[AQD_ottawa]

just an update, the shipment leaves Germany one week later than hoped on the 8th November, sorry for the delay

[AQD_ottawa]

Ian Eisenberg your emails are bouncing back we have emailed you twice. please pm us.

[jjk_reef00]

Any update on shipments?

[AQD_ottawa]

arrived today we start shipping early next week.

[shaginwagon13]

arrived today we start shipping early next week.

How can I pay for one of the Expansion sockets??

[AQD_ottawa]

they are only available in the USA sorry

[shaginwagon13]

they are only available in the USA sorry

I have a US address....

And aren't you guys based out of Ottawa?