PDA

View Full Version : Lost skimmer part..Where can I get one of these??


240gallons
12/08/2013, 09:23 PM
I bought a new Magnus Curve 5 and I have rendered it worthless because I lost a plug that probably cost less than $ .10

I set the skimmer up and tossed out the red plug that goes in the side. Anyone know what size this is? I know its a Caplug. These things are used everywhere but usually for shipping.

:hmm4::hmm4::hmm4::hmm4::hmm4:

Can anyone tell me the size so I can order one?? This is what the plug looks like
https://www.eficonnection.com/eficonnection/ItemDetails.aspx?ItemId=1085

Skrilla
12/09/2013, 07:29 AM
I would email BM. They call it a "tapered plug"

240gallons
12/11/2013, 09:03 PM
No response from bm
..can't speak mandrin either

moondoggy4
12/14/2013, 02:46 AM
try Socaltropiclfish.com

billdogg
12/14/2013, 07:33 AM
I would just go to HD/Lowes, get the pvc plug that fits best but is perhaps a bit oversized and then sand it down until it fits properly. Should cost about $.025

240gallons
12/14/2013, 02:47 PM
I would just go to HD/Lowes, get the pvc plug that fits best but is perhaps a bit oversized and then sand it down until it fits properly. Should cost about $.025

Great suggestion. .this is still rough but seems to be working. Thanks

240gallons
12/14/2013, 02:48 PM
Pic