zenom
02/02/2014, 12:54 PM
I am working on my herbie drain for the new 165 gallon. Please let me know if you see any problems. Basically I have a quick disconnect on both emergency and normal drain. I have the gate valve right under the tank, then elbows going to the sump.
None of this is glued yet, I wanted to make sure it looked decent before I did so. I know I need to support the pvc somehow yet as well. Mostly wanted to make sure the gate valve placement etc looked ok.
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2037%20PM.jpg
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2050%20PM.jpg
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2054%20PM.jpg
None of this is glued yet, I wanted to make sure it looked decent before I did so. I know I need to support the pvc somehow yet as well. Mostly wanted to make sure the gate valve placement etc looked ok.
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2037%20PM.jpg
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2050%20PM.jpg
https://dl.dropboxusercontent.com/u/4137698/Photo%20Feb%2002%2C%201%2050%2054%20PM.jpg