SHOmuchFUN
02/27/2014, 05:52 AM
Noticed one of my Koralia 7's wasn't working and thought maybe I had unplugged it... Turned out it was plugged in, so I unplugged it and plugged it back in. It sputtered 3 times and then didn't start.
So I took it apart, soaked everything in vinegar overnight, put the magnet/impeller back in, plugged it in and the same thing. Pulsed three times and then shut off. Not even a hum/vibration/anything. Like it was completely off. I even spun the impeller with it still plugged in. Nothing. Almost like the motor is giving me an error code or something.
I tackled this project just after I found my Reeflo Snapper seized up. Was not a good night :angryfire:
So I took it apart, soaked everything in vinegar overnight, put the magnet/impeller back in, plugged it in and the same thing. Pulsed three times and then shut off. Not even a hum/vibration/anything. Like it was completely off. I even spun the impeller with it still plugged in. Nothing. Almost like the motor is giving me an error code or something.
I tackled this project just after I found my Reeflo Snapper seized up. Was not a good night :angryfire: