My 210 build

[Aesl1982]

Here is a couple pics from the 210 I just set up. As of last night we are filled with water. Just trying to figure out how to prime this return pump 277723277724277725277726 last pic is of my quartine

[Aesl1982]

So frustrating. First the overflows weren't working properly tank wasn't level after rock and sand. And the left overflow was flowing but not the right one. Got it fixed then had to prime the pump. What a pia that was. Then found two leaks one on a bulkhead and the other on the plumbing. Fixed the bulkhead. But the return plumbing leak I put some fluval putty and see it it works. Doesn't look like it will

[Pife]

What are the dimensions of your tank?

[Aesl1982]

72x24x30

[fairladyZ]

nice tank.. I'm currently setting up my 210.

I have a question.. What return pump are you running? I have an eheim 1262 for mine which i originally thought was going to be fine for a semi low flow sump but now i'm going to plumb my refugium and probably media reactors to the return pump so now i'm not sure if i should up the size of my return pump

[Aesl1982]

I'm using a Pan workd 150 ps it puts out 1150 gph straight to return I have a blow hole 1450 on my skimmer

[fairladyZ]

are you running a durso on it? Just running the 3/4" piping all the way up split to each return? how's it seem flow wise?

[Aesl1982]

I ran one inch. Piping. I'm using something like a durso 278102

[Joel_155]

So frustrating. First the overflows weren't working properly tank wasn't level after rock and sand. And the left overflow was flowing but not the right one. Got it fixed then had to prime the pump. What a pia that was. Then found two leaks one on a bulkhead and the other on the plumbing. Fixed the bulkhead. But the return plumbing leak I put some fluval putty and see it it works. Doesn't look like it will

Cut this out and redo it. It's not worth having the pvc joint fail and dump water on your floor

[Aesl1982]

I did cut the leaking pipe out an redid it today. Tank cycling now with no leaks

[ca1ore]

I'm using a Pan workd 150 ps it puts out 1150 gph straight to return I have a blow hole 1450 on my skimmer

I use the PW 150 on my 265 and have been very happy with it.

[Aesl1982]

278357cycling has started

[Aesl1982]

First round of corals http://img.tapatalk.com/d/14/06/10/ejuma8yb.jpghttp://img.tapatalk.com/d/14/06/10/nyzyzu3a.jpghttp://img.tapatalk.com/d/14/06/10/nyvaqe4a.jpghttp://img.tapatalk.com/d/14/06/10/y7ura7e4.jpg

[Aesl1982]

Better pics http://img.tapatalk.com/d/14/06/10/abe3eve4.jpghttp://img.tapatalk.com/d/14/06/10/uda4arav.jpghttp://img.tapatalk.com/d/14/06/10/puhaqera.jpghttp://img.tapatalk.com/d/14/06/10/qesy5eqa.jpg

[Aesl1982]

Adapted nicely

[Aesl1982]

http://img.tapatalk.com/d/14/06/10/abegaqeb.jpg