PDA

View Full Version : Led Help


mikea213
08/10/2014, 08:53 PM
Any one really good at working on LEDs? I have a 200w Evo Im having trouble getting running right. On friday I replaced all the fans in my 2 unit as they had slowly start to fail and the wires were snapped off at the motors on a few ofthem and a few other bad connection there sure not built for saltwater tanks thats for sure lots of corrosion inside cost about $100 to fix and a days if time. Well heres where Im at on the one unit the fans fire up to full speed no problems. On the other there running at maybe 40% and on this unit I did notice on both of the little orange covers over the drivers on just the blues they had started to get hot and melt from the lack of air from the fans going out. I know the fans come on at full speed with the blues but why not 100% on the one? Ideas? The one working right you can touch the fixture its warm to the touch. The other is super hot.


Thanks,