PDA

View Full Version : DIY LED's

Erik2514
10/15/2014, 09:12 PM
So I want to build my own set of LEDs... I am contemplating two strips to run along side my T5's or possibly as a stand alone... I do want to eventually make one for my nano... I am just lost on what colors I should et along with what kind of driver... I hve no clue when it comes to drivers so any help would be greatly appreciated. Thanks again in advance
zachts
10/15/2014, 11:08 PM
Post more info about your current light setup and the corals you are/want to keep. Also the size and depth of your tank and your level of DIY savyness.

I'd suggest also spending some time researching the various LED threads and reading up. All the info is out there and not too hard to find.

I'd be happy to make suggestions, but we need more info.
Erik2514
10/16/2014, 05:03 AM
The current setup I have is a 4x39w t5 ho setup... Corals are mainly LPS softies and zoas... I have a 40g breeder as of right but might be switching to a 60-65g tank that I believe is 24 inches deep...my diy savvyness has yet to be really determine haha but I can make it wirk with a little guidance and help
toothybugs
10/16/2014, 05:29 AM
Following. I'm very interested in doing my own LEDs since my desktop system is so far entirely DIY (frameless, internal overflow and skimmer system, etc since I can't have a sump at work) and the dimensions are weird: 36x12 base, and only 8 high so it's long and wide for the depth.
zachts
10/16/2014, 11:48 AM
The current setup I have is a 4x39w t5 ho setup... Corals are mainly LPS softies and zoas... I have a 40g breeder as of right but might be switching to a 60-65g tank that I believe is 24 inches deep...my diy savvyness has yet to be really determine haha but I can make it wirk with a little guidance and help

Canopy or hanging light fixture. what light fixture. Post a pic. Also what sort of price range are you thinking? Dimming?
Erik2514
10/16/2014, 01:07 PM
It's a current usa 4x39w not hanging on 4 legs...ummm I was thinking constant current but might consider dimmable and haven't really thought bout price range just trying to get an idea of whole thing
zachts
10/16/2014, 04:48 PM
What about building it into your fixture in place of two of the bulbs and one of the ballasts?
Docdiggy
10/16/2014, 05:15 PM
Erik, I didn't realize that your light is not hanging. That could be a problem with the setup I've been talking to you about.
Erik2514
10/16/2014, 06:33 PM
Gotcha... So my best bet would probably be to do a full DIY setup and get rid of t-5's if I wanted to go that route