Which return pump and powerbeads should I get for my new tank?

[Econ]

Hi folks,

I just took delivery of a new 150gal tank, with its corresponding sump. I know need to purchase (among other things) a return pump and powerheads for the tank. The tank is 60x24x24. I will add a chiller to the tank, a GFO reactor and a water reservoir for auto top-offs.

For powerbeads I'm leaning towards 2 Vortec MP-40's. The thing is that I had no clue as to which return pump should I get. I want something reliable that will make little/zero noise and that will consume as very little electricity as possible. My budget is around 400-500 dollars.

I appreciate in advance any advice you can provide me on this.

Thanks!

[Da Maui life]

insufficient information....Think friction loss and static head.

The GPH 'size' of the pump you need depends on the flow rate you want and the actual plumbing you build.

[tkeracer619]

Will the sump be under the tank? The Mp40's are awesome pumps.

Look at the ehiem 1262 for a return. Very reliable.

You want somewhere between 5-10x display volume turned over each hour.

Congrats on the new tank!

[andyman]

Iwaki pumps all the way for return. I personally don't like the impeller design of the mp40 (unless they changed it). Either a bunch of mp10 or mp60.

[pmrossetti]

Eheim 1262

[liven learn]

Sicce return pump

[rsaha]

My eheim has been running for over 5 years no issue.

[tkeracer619]

rsaha, I had a 1262 that was unidentifiable. The labeling (painted on) had all worn off, the power cord was dry rotted and falling apart. I believe it was close to 14 years old and still worked when I tossed it. I replaced it with another 1262, no question.

[rsaha]

Guess i have another 9 years of trouble free use ahead of me. Good to know:-)