PDA

View Full Version : UPLC-II Leaking


rownsurf
11/26/2014, 09:27 AM
My UPLC has started leaking at the water-in connection. I've tried removing and replacing the tubing. Any other suggestions?

Thanks,

Justin

SpectraPure
11/26/2014, 09:53 AM
We are a bit confused. The "water-in" connection would be the 1/4" tubing simply pressed into the pump's tubing. You have replaced the tubing. Please clarify.

Support at SpectraPure

rownsurf
11/26/2014, 04:11 PM
Sorry it's actually the water-out.

SpectraPure
11/26/2014, 04:13 PM
Please take the tubing out, and inspect near the white fitting for and splits or punctures in the tubing. Also if it is at the union. Make sure that the 1/4 poly ethylene tubing is seated all the way in the union.

Jeremy

rownsurf
12/06/2014, 06:52 PM
Came in to post on another thread and realized I had never responded further to this. After pulling the tubing out a few times I finally got it situated where it would leak. Maybe a piece of grit got in there. Anyways, it's working fine now and I appreciate your timely response, even if my own followup wasn't!

SpectraPure
12/08/2014, 10:32 AM
I am glad that I was able to help. Keep an eye on it!

Jeremy