PDA

View Full Version : Actual footprint for double cone 200


vikz
12/15/2014, 03:55 AM
hi guys

i have my heart set on a Double Cone 200 from Royal Exclusiv.

But I think my footprint might be too small. Can it be adjusted slightly.

my footprint.

If skimmer needs to deeper than 6"

270mmx410mm

or if 6" or less

300mmx410mm

would it fit?

Klaus Jansen
12/16/2014, 01:21 PM
Hi vikz...

hope it helps....:wave:

Best regards .. .Klaus


http://royalexclusiv.net/images/content/bk_dc/eng/bk_dc_200_eng.pdf

vikz
12/16/2014, 04:48 PM
Thanks klaus

I don't think I can fit it.

I am 20mm to small

slief
12/17/2014, 01:35 PM
There is some extra room in the rubber tubing that connects the pump to the skimmer body. As such, you can cut about 20mm off the rubber tube to bring the pump in closer to the skimmer body. By doing that, you could reduce the footprint to 380mm x 320mm.

vikz
12/18/2014, 02:47 PM
There is some extra room in the rubber tubing that connects the pump to the skimmer body. As such, you can cut about 20mm off the rubber tube to bring the pump in closer to the skimmer body. By doing that, you could reduce the footprint to 380mm x 320mm.

thanks slief

the 380mm is fine (I have 410mm), its the 320mm that im struggling with, as I only have 270mm