jeemann99
01/27/2015, 12:59 PM
I have a 36x36x30 Cube with Center overflow. The Acrylic is 1/2" thick. Mostly Softies, LPS and Nems, but will be getting into some SPS. I run 2 MP40 wireless at 50% Lagoon. Both are located on the back wall because I did not want to see any cords. 1 is located top left approx 4" from top and the 1 bottom left approx. 8" from bottom.
I also use an internal Mag 18 running at full that are aimed at the backwall.
My question is should I stay with the 2 MP40's or should I trade them and get 4-MP10's. And place them all on the back wall 2 on the left and 2 on the right.
What would you do?
I also use an internal Mag 18 running at full that are aimed at the backwall.
My question is should I stay with the 2 MP40's or should I trade them and get 4-MP10's. And place them all on the back wall 2 on the left and 2 on the right.
What would you do?