PDA

View Full Version : Litermeter remote pump tubing generation?


inerratum
01/27/2015, 07:40 PM
I have this pump, it has the metal pump head. What generation replacement tubing do I need? I also watched the video here https://www.youtube.com/watch?v=TDX2bDTrwms that shows white thrust washers inside the pumphead. My pump does not have these washers, should it?

http://i1074.photobucket.com/albums/w410/BlitzM4/2015-01-27%2018.29.56_zps2s4qdny3.jpg (http://s1074.photobucket.com/user/BlitzM4/media/2015-01-27%2018.29.56_zps2s4qdny3.jpg.html)

SpectraPure
01/28/2015, 07:54 AM
We have found that the thrust washers don't really provide any benefit to the proper and long-term operation of the pump. If your pump doesn't have them, you don't need them.

Support at SpectraPure

inerratum
01/28/2015, 09:22 AM
Is there any way to tell what generation tubing I need?

SpectraPure
01/28/2015, 09:53 AM
Disassemble the pump head and inspect the tubing. If there is a shiny plastic coating on the side of the tubing that faces the rollers, it's a Gen5. If not, it's a Gen4.

Support at Spectrapure

SpectraPure
01/28/2015, 10:35 AM
I would already assume that the part you are looking for lm3-tbn-kit. I could be wrong, but we have a reference on our litermeter page of our website. I would post a link, but I am out of the office and away from my computer.

Jeremy

SpectraPure
01/28/2015, 11:03 AM
To select the appropriate rebuild kit, refer to below:

LM3 Serial Numbers:

05/25/05 LM3-10001-10555, LM3-11001-11046

07/10/07 G4 LM3-11047-11403

08/28/08 G5 LM3-11404-11431, LM3-51001-51363, LM352001-52002

09/02/08 G6 LM3-55001-55050, LM3-60001-Present