PDA

View Full Version : Tunze 6095 jumpers & Apex function


herocero
02/09/2015, 09:14 PM
Got a new 6095 and been brushing up on my profile and OSC programming skills. The 6095 came with different jumpers for 15, 18, 20 and 24v (20v installed by factory). The Apex manual says the ports are 10v, does running a jumper higher than 10v on the 6095 do anything? Also from the manual Neptune says don't run less than 30% intensity on the Tunze, does this mean my minimum intensity on all profiles the pump will use should never be less than 30?

Thanks in advance, fun stuff!

slief
02/10/2015, 09:45 AM
The jumpers have nothing to do with the 0-10v control. The jumpers only impact the power input into the pump. At the lower voltage, the minimum and maximum pump power/GPH is reduced. The higher the voltage, the higher the minimum and maximum flow. If you use your pump in a really small tank, you may want lower flow than the pump is capable of. As such, running the lower voltage jumper can be a better choice. As such, those jumpers lend for some additional flexibility for the pump to be used in a wider range size of systems.

herocero
02/18/2015, 09:44 PM
Thanks for the reply, so the 0-10V is just for control.