1MP3R1AL
02/10/2015, 03:13 PM
Fixture: 6 bulb T5. (from front: Blue+ | Purple+ | Coral+ | LED | Blue+ | Actinic | Blue+)
LED: 2 Nano Box V3 13UP's, 2 Mean Well ELN-60-48D's controlled from Apex.
Unmolested T5 fixture awaiting surgery. Poor guy.
http://www.districtburners.com/iankreer/projects/T5LED/1.jpeg
Let's get busy!
http://www.districtburners.com/iankreer/projects/T5LED/2.jpeg
After cutting off the middle divider, this is where the 13UP's will go.
http://www.districtburners.com/iankreer/projects/T5LED/3.JPG
http://www.districtburners.com/iankreer/projects/T5LED/4.jpeg
Bracing the fixture frame so my custom bent 1/2 tubing can be installed. Notice the center is aluminum. This is where the 2 13UP's will be installed.
http://www.districtburners.com/iankreer/projects/T5LED/5.JPG
Test fit with the reflectors on, looks good!
http://www.districtburners.com/iankreer/projects/T5LED/6.JPG
More to come!
LED: 2 Nano Box V3 13UP's, 2 Mean Well ELN-60-48D's controlled from Apex.
Unmolested T5 fixture awaiting surgery. Poor guy.
http://www.districtburners.com/iankreer/projects/T5LED/1.jpeg
Let's get busy!
http://www.districtburners.com/iankreer/projects/T5LED/2.jpeg
After cutting off the middle divider, this is where the 13UP's will go.
http://www.districtburners.com/iankreer/projects/T5LED/3.JPG
http://www.districtburners.com/iankreer/projects/T5LED/4.jpeg
Bracing the fixture frame so my custom bent 1/2 tubing can be installed. Notice the center is aluminum. This is where the 2 13UP's will be installed.
http://www.districtburners.com/iankreer/projects/T5LED/5.JPG
Test fit with the reflectors on, looks good!
http://www.districtburners.com/iankreer/projects/T5LED/6.JPG
More to come!