PDA

View Full Version : Does this sound about right?


blrrobinson21
03/13/2015, 03:08 PM
My brand new Chloramine 90gpd unit is only putting out 100ml of output to 500ml of waste. The unit gets about 45-48 avg psi and I have the green flow restrictor in on soft water. I have checked pressure after the 3 sediment filters and get good pressure. I have pulled the output line off the injection membrane and Im getting terrible flow through it. I actually measured it too against the waste and im getting around 110 ml to 500 ml of waste. Does that sound right?

SpectraPure
03/13/2015, 03:22 PM
We may have more questions, but the first one would be: what is the actual tap water temperature? Put a thermometer in a glass and run the sink faucet into it for 5 minutes.

Support at SpectraPure dot Com

blrrobinson21
03/13/2015, 05:41 PM
Water is 57.1 degrees

SpectraPure
03/16/2015, 11:22 AM
Membrane specs can be as much as -20% of typical rated output = .80x factor

45 psi = .75x factor

57.1 deg = .707x factor

So, 90 x .80 = 72 72 = x .75 = 54 54 x .707 = 38 GPD (min).

110 ml/min = 41.8 GPD.

500/110 = 4.54 to 1. A little much this time of year, but when the water warms up, the ratio will go down.

Support at SpectraPure