PDA

View Full Version : Need help with new setup- phosphate


las
03/23/2015, 05:44 PM
I've got a tank with old live rock that has been sitting for 6 months, with no inhabitants. I tested the water and the phosphate is 1.41 on a Hanna low range phosphate meter. I did a couple test and both were same. Then I tested some ro/di water to make sure the reagent was good. The test came out 0. So, it's legit.

Now I'm in the middle of starting up an LPS/SPS tank. I'm wondering if I can use this live rock. Do you guys think i could pull all that phosphate out of that LR with phosphate remover/skimming/Algal Turf Scrubber Or should I dump this 5yr old live rock and start new?

It's 100 ish lbs so it's a lot of money that I could use on a skimmer or whatever. I'm not sure what to do but I don't want to waste time and $ if it's a lost cause.

Any advice people? Thanks for your support.

las
03/23/2015, 05:54 PM
Sorry about the double thread. Do t know how that happened

Tzwizzle
03/23/2015, 07:11 PM
The rocks could have soaked up a lot of phosphate. I would start fresh if you want sps. Could be a long costly uphill battle if you don't. My 2 cents