PDA

View Full Version : DI order


unkel j
05/05/2015, 04:13 PM
I have a 90 gpd maxcap rodi. I have a maxcap in the first di chamber and a silica buster in the second. Does it matter what order the two differant di canisters are in? The maxcap is exausted but i dont think the silica is. So do I put a maxcap in #2 and move silica to #1 or do I just change maxcap, or both?

SpectraPure
05/06/2015, 08:08 AM
It most definitely matters! Always the MaxCap DI must go first, the "system" doesn't work otherwise. If the MC is so exhausted that its TDS is greater than the TDS out of the RO membrane and the SB is still putting out 000 TDS, remove the MC, use the SB in place and get a new MC ASAP. Probably should get another SB to have on hand.

Support at SpectraPure

unkel j
05/06/2015, 06:48 PM
OK, got them ordred. Thanks:)

SpectraPure
05/11/2015, 10:32 AM
Excellent! Thank you!
bruce