Tunze pump control with Apex Controller

[Moonfroz]

Hello

I have a 180 gallons tanks which is 2 feet x 2 feet x 6 feet long. I have 4 Tunze Pump 6105 (with 24V jumper on the power supply. The 2 pumps are on the left and 2 pumps on the right.

Tunze pumps setting on my Apex Controller:

Note: FL=front left; RL=rear left; FR=front right; RR=rear right.

tunzeFL
Fallback OFF
If Time 08:00 to 21:30 Then TunzeDayL
If Time 21:31 to 07:59 Then TunzeNightL
If FeedA 005 Then OFF

tunzeRL
Fallback OFF
If Time 08:00 to 21:30 Then TunzeDayL
If Time 21:31 to 07:59 Then TunzeNightL
If FeedA 005 Then OFF

TunzeFR
Fallback OFF
If Time 08:00 to 21:30 Then TunzeDayR
If Time 21:31 to 07:59 Then TunzeNightR
If FeedA 005 Then OFF

TunzeRR
Fallback OFF
If Time 08:00 to 21:30 Then TunzeDayR
If Time 21:31 to 07:59 Then TunzeNightR
If FeedA 005 Then OFF



Profile: TunzeDayL
Control Type: Pump
Synchronize: Disable
Divide by 10: Disable
Initial off time: 0 sec.
On Time: 4 sec.
Off Time: 2 sec.
Min. intensity: 30 %
Max. intensity: 100 %

Profile: TunzeDayR
Control Type: Pump
Synchronize: Enable
Divide by 10: Disable
Initial off time: 2 sec.
On Time: 4 sec.
Off Time: 2 sec.
Min. intensity: 30 %
Max. intensity: 100 %

Profile: TunzeNightL
Control Type: Pump
Synchronize: Disable
Divide by 10: Disable
Initial off time: 0 sec.
On Time: 8 sec.
Off Time: 4 sec.
Min. intensity : 30 %
Max. intensity: 70 %

Profile: TunzeNightR
Control Type: Pump
Synchronize: Enable
Divide by 10: Disable
Initial off time: 4 sec.
On Time: 8 sec.
Off Time: 4 sec.
Min. intensity : 30 %
Max. intensity: 70 %.

I am not getting all the flow I would like to have on my SPS. Do you have any suggestion in order to improve my setting???

Thanks for your help!

[Moonfroz]

Nobody can help me!?!