PDA

View Full Version : Fill it up?


padi200
07/02/2015, 11:36 PM
I keep reading you don't really want carbon to tumble in your media reactor. My question is, should you fill the reactor chamber all the way up to the top so the carbon can't tumble? OR just use less flow?
Which is better?

A sea K
07/03/2015, 06:00 AM
Just use less flow, no need to add more carbon than what is needed. If you are still concerned about fines from overtumbling then just use a filter sock on the effluent line from the reactor.

ericarenee
07/03/2015, 08:17 AM
Reduce the flow with a Valve on the exit side of the carbon chamber if you can CARBON Works good under slow flow and a bit of pressure will not hurt