PDA

View Full Version : Rodi help!


007rick
08/16/2015, 08:23 AM
I've decided on a basement fishroom! However I need a place for my RODI setup... Can I connect it here off my main using a tap connector?http://images.tapatalk-cdn.com/15/08/16/12a7cb6d835cee95a5ccb1a58425583a.jpg

007rick
08/16/2015, 09:09 AM
Please help quickly.... I'm usually patient but my wife is at me about finishing this project haha!

robn70
08/16/2015, 10:37 AM
I would just use an adapter on the valve at the top of the picture. You will get better water pressure then you will with taping the line. I found this out with my ice maker. I have my RODI in the laundry room and I just put a 2 hose connector on the cold water valve for the washing machine.

Vinny Kreyling
08/16/2015, 12:44 PM
Yes, better off from the valve.
Can't read the gauge but looks like low pressure, might need a booster pump.

outssider
08/16/2015, 04:26 PM
Yes, better off from the valve.
Can't read the gauge but looks like low pressure, might need a booster pump.

looks like your pressure regulator is right there....if your pressure is low, you can raise it with that valve....it will raise the pressure in the whole house however.

Think about where or what you're going to do with the waste line too!!

007rick
08/16/2015, 04:41 PM
Perfect thanks a bunch guys! Will let you know!