PDA

View Full Version : Which filters do I need?


drillsar
10/11/2015, 09:39 AM
Ok I am 100% sure I need to replace all my filters including my membrane. My town's water is fed by well water. Would it better to use .5 micron filters for this reason? Also I have the 90gpd refurbished unit and looking into the new 99% reject rate membrane. Do they come with flow restrictors? Do I need to get a flow restrictor or the one I have is ok?

drillsar
10/11/2015, 11:27 AM
TDS going into RO/DI is 450

TDS after sediment/carbon is 443

After membrane before DI 115

SpectraPure
10/14/2015, 05:27 PM
TDS going into RO/DI is 450

TDS after sediment/carbon is 443

After membrane before DI 115

What is the pressure? The membranes do not come with flow restrictors, but your flow restrictor should be just fine. The hal microns are better.

What kind of life do you get out of you di?

Jeremy

drillsar
10/14/2015, 07:04 PM
the pressure is at 60 psi.. MY DI is going very fast so I am thinking because the membrane is shot. The membrane only lasted a few months is this common? My town uses well water and I have the manual flush. I flush the membrane before and after use. I was hoping you guys have free shipping or discounts :(

SpectraPure
10/16/2015, 12:13 PM
email me a picture of the membrane.

[email protected]

Jeremy