flananuts
01/03/2016, 07:18 PM
I have a new reeder 170 setup and I'm using an M1 and mp10qdw. After calibrating and dialing in, I came back from a day away and both the mp10 and M1 were in a slow white flash. After this, the M1 was in a green flash and the pump wouldn't respond . I had to unplug for a few minutes then plug back , go through calibration in order to set back up.
Questions: what is the slow white flash I saw in both drivers, and what is the green flash on my M1?
Thanks.
Matt
Questions: what is the slow white flash I saw in both drivers, and what is the green flash on my M1?
Thanks.
Matt