Component +1 +2 +3

[rick_466]

Good Morning,

I want to use the "component +1, +2, +3" product. I have doubts about
its use.

I read in various forums that I must add the same quantity of
component +1, component +2 and component +3 based on consumption of
KH. And then, I must adjust Ca y Mg with "Calcium" and "Magnesium" products.

In my case, my aquarium has an daily consumption of 0.8 KH and 2.7
Ca. If I add 30ml of component +1 (To raise the KH to 0.8) and I add
30ml of component +2, I will raise the Ca to 5.4 (more than I need).

How should it do it?

Thank you for your help

[Aquaforest]

We recommend to establish a uniform dose according to consumption KH and every Components dosing in the same dose.
Component1+2+3+ contains microelements also that's why it will be better to dose Ca or Mg if you need separately besides Component1+2+3+ - if You need ofcourse.
But in health system every macroelements will be consumed in good proportions and You could use Every Components in the same dose.

[rick_466]

Ok! thank you for your reply.

Then, I will change the programation of my pumps.

I will add 30 ml of component +2 to reach the 0.8 KH of daily consumption and 30 ml of component +1 and component +3. With this configuration, I think that the Ca will have a significant increase. I understand that, with the time, the values will be adjusted automatically because consumption of Ca will increase. It is correct?

[Aquaforest]

Yes, that's correct.


Regards,
Aquaforest