PDA

View Full Version : Custom Water Exchange and ATO system


Pseudo69
03/07/2016, 10:51 AM
Jeremy,

I started my new build and want to update my water exchange and ATO system. I already have my ATO system setup with a 20 gallon fresh water tank with a High/Low LLC-SVC-2FLT-4-10 connected to my RO/DI with manual flush system. I also have a 50 gallon salt mixing container.

You have my 100gpd UHE system in the shop now (RMA Jeremy63). I need to integrate it into my new system. The schematic of the old setup is below. I want to eliminate the old RO/DI unit in the pic for the UHE, also remove the ball valve and use my LLC for the salt water tank and the UHE HI/LO floats for the Top off tank. Do you think this will work the way I designed? What do I have to do to set the UHE up correctly?

http://i289.photobucket.com/albums/ll220/Brugal_photos/Multiple%20Reef%20tanks/Reef%20Equipment/SP%20Pic_zpsyvbxxjhr.jpg (http://s289.photobucket.com/user/Brugal_photos/media/Multiple%20Reef%20tanks/Reef%20Equipment/SP%20Pic_zpsyvbxxjhr.jpg.html)

I also need to figure out the auto water exchange system. I have the following equipment in hand for both systems already:

2 Litermeter III
2 LM3-WXM
1 LM3-RPM
1 LM3-MPM
1 LM3-TCM
1 Aquatec 8800 Booster pump with pressure switch
1 LLC-SVC-2FLT-4-10
1 EA-SV-01 Solenoid.
1 UHE 100gpd
Thanks,

Kasei

Pseudo69
03/07/2016, 10:57 AM
Also I am using 1 Litermeter for the Water exchange and the other Litermeter for 3 part dosing. What else do I need for the whole system?

Thanks